Testing & Measuring Instruments

Product Details:

The instrument is used for sag resistance evaluation to ensure a uniform film thickness by selecting suitable thickness, which is conducive to verticals, corners, holes, circular pieces of painting controlled. Viscosity,fineness,thickness are major factors in the impact of sagging.

• Determination of sagging properties of coating materials and similar products on flat substrates
• Easy to handle
• Reliable results
• Easy to clean

Additional Information:

• Item Code: PES2000A

Detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM)The Meter indicates the presence of carbon monoxide in two ways:1. By a reading on the LCD in PPM.2. By a beeper tone.3. Above 200 PPM, the beeper sounds continuously with the concentration of CO.4. From 35 PPM to 200 PPM, the beeper sounds dis continuously with the concentration of CO.

Max Hold and Data Hold Facility

Display Backlit LCD

Range 0 to 1000PPM

Resolution 1PPM

Accuracy ±5% or ±10 PPM

Warm up period <2 seconds

Auto Power off

Additional Information:

• Minimum Order Quantity: 1 Piece

Auto Ranging, Auto Selection SMT Component tester

Features:

• Display 6000 Counts LCD Display
• Overload and Low Battery Indication
• Auto Power Off
• DC Voltage 0 – 600m / 6 / 50V DC
• Accuracy ±0.8%
• AC Voltage 0 – 600m / 6 / 50V AC
• Accuracy ±1.0%
• Resistance 0 – 600 / 6k / 60k / 600k / 6M /60MΩ
• Accuracy ±0.8%
• Capacitance 0 – 6n / 60n / 600n / 6u / 60u / 600u / 6m / 60mF
• Accuracy ±3.0%
• Diode Continuity Test
• Provided with extended probes for discrete component testing.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Backlit LCD Dual Display

Low Battery Indication

Under Range and Over Range Indication

Fast Response Time

Battery Operated.

Measuring Range 0 - 5 PSI

It measures in various units like inHzO, PSI, bar, mbar,

kPa, inHg, mmHg, OZinz, ftH2O, cmHzO, kgcmz.

With RS-232 PC Interface Facility

High Accuracy of 0.3%

Taut Band Movement

Simple operation

Wiring check

Robust

Can be used on 2 wires L-E (RCCB / ELCB tester)

Can be used on 3 wires L-E-N (with wiring check)

No batteries

Sense automatically 50 or 60 Hz

Current injected in phase with the voltage.

Current Settings 10-50mA @110Vac (230Vac, 550Vac)

Frequency of operation 50 / 60 Hz Sinusoidal

Operating Voltage (L-E) 110Vac (230Vac, 550Vac) +/-15%

Meter Accuracy ±1% of Full Scale

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Features:

Digital Watt Meter Microprocessor based 3 phase and single phase Power Factor measurement.Available in 96 * 96 mm Bezel Size for three phase and single phase meters and 96 * 48mm for single phase meters.Meters can be factory set for different CT/PT ratios to give a direct reading.

Product Details:

Features:

Size - 96 x 96 mm. sq.

Display 3-1/2 Digits

Would measure AC Voltage.

Range: Any Single Range up to 1000V for direct

input to the meter ‘or’ KV rating through a PT input

can be made available.

Can set single set point to activate a relay.

Potential free 1 NO+ 1NC Contact

Auxiliary Power Supply: 230V AC 50Hz / 110V AC

50Hz/ DC Auxiliary inputs also available

At the time of placing the order, please inform

the Voltage range, PTR value (if the input is through a

PT), auxiliary power supply

Product Details:

Measures coating Thickness on both Ferrous and Non Ferrous materials with interface cable S/W The CTG-01 coating thickness gauges work either on the magnetic induction or on the eddy current principle,depending on the type of probe used.You can select the type of probe via MENU system or it will work automatically.Operating with MENU Easily.Zero Calibrating Easily.Low Battery , error indication.USB Interface for PC analysis software.Disable Auto Power Off function via MENU setting.

Measuring Ranges

Ferrous 0 ~ 1250um

0 ~ 49.21mils

Non Ferrous 0 ~ 1250um

0 ~ 49.21mils

Guaranteed Tolerance

Ferrous ±3% ±1um

±3% ± 0.039 mils

Non Ferrous ±3% ±1.5um

±3% ± 0.059mils

Precision

Ferrous 0.1um / 0.001 mils

Non Ferrous 0.1um / 0.001 mils

Minimum Curvature radius

Ferrous 1.5mm / Non-Ferrous : 3mm

Diameter of Minimum Area

Ferrous 7 mm / Non ferrous : 5 mm

Basic critical thickness
Ferrous 0.5mm / Non Ferrous : 0.3mm

Product Details:

Features:

Easy to read LCD Display 3-1/2 Digits 1999 Counts High measuring Accuracy Measurements possible even under strong magnetic field LSI Circuit Provides high reliability and durability Light Weight and compact construction Range 0 – 200p/2n/20n/200n/2u/20u/200u/ 2000u/20000uFAccuracy ± 0.5%

Compact Highly Reliable 3-1/2 Digit Instrument

Uses 4 Terminal Measurement method

Has 12.5 mm high 7 segment 3-1/2 Digits LED

Display

Range                  0 - 1999u/19.99m/199.9m/

                             1.999/19.99/199.9/1999Ω

Accuracy               + 0.3% + 2 dgs

Normal Test          1.5 / 0.75 / 0.75 / 75m /

Current                  7.5m / 0.75m / 0.075mA

Warm up Time      30 minutes

Input                      230V Single Phase AC 50Hz

Complete with instruction manual, mains chord

And test leads

Additional Information:

• Minimum Order Quantity: 1 Piece

Measures Power and Energy for single phase and three

phase loads

Auto-ranging

Data Logging up to 99 Data

Sleep Mode

Clamp Jaw Dia 56mm

Confi rms to CAT III 600V, IEC 61010, CAT IV 300V

Non Contact Voltage Detector

Data Hold, Max / Min record

USB PC Interface

Display                 4 digits Triple Backlit LCD Display

                            with analogue bargraph

AC Voltage          0 – 100 / 400 / 750V T-RMS

Accuracy             ±1.2%

AC Current          0 – 40 / 100 / 400 / 1000A T-RMS

Accuracy             ±2.0%

Active Power       0.01kW – 750kW

Accuracy             ±3.0%

Apparent Power  0.01kVA – 750kVA

Accuracy             ±3.0%

Reactive Power   0.01kVAR – 750kVAR

Accuracy             ±3.0%

Power Factor      0.3 – 1 (Capacitive / Inductive)

Accuracy             ±4.0%

Phase Angle       0°- 90°

Accuracy             ±2°

Frequency           50Hz – 200Hz

Active Energy      0.001 – 9999kWh

Accuracy             ±3.0%

Temperature       -50° - 1300°C

Additional Information:

• Minimum Order Quantity: 1 Piece

Hour Meter-NE 045/7S

Features:

• Counting Range 99999.99 Hours
• Panel Flush Mounting
• Size 52 x 52 mm sq
• Standard Voltage 10 – 48 V DC
• Temperature Range -20 to 65°C

Additional Information:

• Minimum Order Quantity: 1 Piece

Self Diagnosis

Identifi es Unknown model number of Devices

Measures more than 2000 kinds of devices

Tests 54 / 74 series TTL

Tests 4000 and 4500 series CMOS

40 Pin capability

Control                             16 key tact switch keypad with dual tone sound indication

Display                             6 Digit LED Display

Test Socket                      40 pin ZIF Socket

Library of ICs                   TTL54 Series, TTL55 Series, TTL74 Series, TTL75 Series,

                                        CMOS14 Series, CMOS40 Series, Optical Coupler Series,

                                         LED Display Series, RAM Series, SCM Series, CPU

                                         Peripheral Series

Auxiliary Power Supply    220V AC 50Hz

Additional Information:

• Minimum Order Quantity: 1 Piece

Features:

• Counting Range 99999.99 Hours
• Panel Flush Mounting
• Size 52 x 52 mm sq
• Standard Voltage        220V / 110V AC (Any One)
• Temperature Range     -20 to 65°C

Additional Information:

• Minimum Order Quantity: 1 Piece

Thermometer with High and Low Alarms

Built-in 110mm stainless steel sensor

1 second normal temperature sensing time

Low Battery Indication

Data Hold Function

Temperature can be measured in °C and °F

Range                 -50 to 300°C/ -58°F to 572°F

Accuracy             ±1°C

Resolution            0.1°C / 0.2°F

Low Battery Indication

Additional Information:

• Minimum Order Quantity: 1 Piece

Designed with high accuracy sensor for temperature  humidity Fast Response and Highly Stable Used for Monitoring and collecting data of environmental temperature and humidity Memory for 32700 values LCD to show logging information easily;Freely selectable measurement cycle from 1 sec. to 24h;Download collected data through PC’s USB;Alarm display if user-defined maximum/minimum values are exceeded;Analysis software used to view graph for logging data

Relative Humidity       0 to 100% RH

Range   

Accuracy                    ±3.0%

Temperature              -40 to 70°C

Accuracy                    ±1°C

Sampling Rate           Settable from 1 Sec. to 24 Hours.
With USB PC Interface Cable and Software 

Additional Information:

• Minimum Order Quantity: 1 Piece

Can be used for both audible sound and machine noise

Can be used for both A and C weighting

Max Hold facility

Measures in both Low range of 30 to 100dB and hi

rangeof 60 to 130dB

Range                            30 - 130 dB

Accuracy                        ±1.5dB

Resolution                      0.1dB

Frequency Response      31.5Hz to 8kHz

Has Fast and Slow response facility

 

Meets IEC651 type 2, ANSI S1.4 type 2 standards

Additional Information:

• Minimum Order Quantity: 1 Piece

Bench top Portable, Mains Operated

Auxiliary Power   230V Single Phase AC 50Hz Supply

Display               4-1/2 Digits 19999 Counts LCD

Sources

DC Voltage        0 - 199.99m/1.9999/19.999V

Accuracy            ±0.05% ± 2 Counts

DC Current         0 - 199.99u/1.9999m/19.999mA

Accuracy             ±0.05% ± 2 Counts

Measures

DC Voltage        0 - 199.99m/1.9999/19.999V

Accuracy           ±0.05% ± 2 Counts

DC Current        0 - 199.99u/1.9999m/ 19.999mA

Accuracy           ±0.05% ± 2 Counts

Output

Adjustable          by 10 Turn POT for COARSE and FINE

Additional Information:

• Minimum Order Quantity: 1 Piece

Features:

• Display 3-1/2 digits LCD, maximum
• Reading 1999.
• Range 200/2000 mG,20/200μT.
• Resolution 0.1/1 mG or 0.01/0.1 μT.
• Frequency response 30Hz to 300Hz.
• Sensor Single Axis
• Accuracy ±(2.5%±6dgt) at 50Hz/60Hz.
• Over load Indication
• Battery 9V

Additional Information:

• Minimum Order Quantity: 1 Piece

Microprocessor Based instrument

Measures Single Phase Voltage, Current, Watt and

Frequency

Suitable for direct line applications

Can also be used in conjunction with a CT having

1A or 5A CT secondary

Display                                4 Digit LED Display

Minimum 10% of full load current is required for

proper operation

Accuracy                               1%

Additional Information:

• Minimum Order Quantity: 1 Piece

High Resolution up to 100uA

Display                                3-1/2 Digits 1999 Counts Backlit LCD

Auto Power Off

Max Hold Function

Clamp Jaw Dia                    30mm

Overload and Low Battery Indication

AC Current                          0 – 200m / 2 / 200A

Accuracy                             ±2.5%

Confirms to EN61010-1, EN61010-2-032, CAT II 600V

Additional Information:

• Minimum Order Quantity: 1 Piece

Utilizes SMT Technology

Green LED Display

Voltage and Current displayed together

Multi-turn variable device to provide high precision voltage setting.

Auto-tracking on PARALLEL and SERIAL working condition

Presetting the voltage and current

DC Output Switch

Extended output terminals

Continuous working under full load condition

Constant Current and Constant Voltage Protection

Short Circuit protection

Input                                     220 / 110V ±10% 50~60Hz

Variable Output Voltage       0 - 30V DC

Variable Output Current       0 - 2A

Additional Information:

• Minimum Order Quantity: 1 Piece

Microprocessor based 3 phase and single phase Power Factor measurement.Available in 96 * 96 mm Bezel Size for three phase and single phase meters and 96 * 48mm for single phase meters.Meters can be factory set for different CT/PT ratios to give a direct reading.Three phase meters display individual phase values and also system values.Available for 415V(LT) and 110 V(HT) systems and for1Amp and 5 Amp CT secondary.Auxiliary Power Supply: 230V AC 50Hz / 110V AC 50HzIn the Model number Y could be 3 for 3 phase and 1for single phase and X could be 2 for 2 wire loads, 3 for3 wire loads and 4 for 4 wire loads

Additional Information:

• Minimum Order Quantity: 1 Piece

Consists of a transmitter and a receiver Used to detect or trace conductors and to find short faults in them.The signal generated by the transmitter is made into a modulated current,generating an electromagnetic field around a conductor. This electro magnetic field induces a voltage within the receiving coil. The induced voltage is amplified, decoded and converted to the original signal by the receiver and finally displayed on screen.It is used for finding conductors in walls, conductor interruptions, short-circuitsin conductors Conductor tracing in the soil Detecting fuses and assigning current circuits Tracing sockets and distribution sockets having accidentally been covered by plastering Detecting interruptions and short-circuits in floor heating Tracing metallic water and heating pipes All application are (both, voltage-free and live) are performed without using any additional instruments Transmitter display indicates the transmission level, the transmission code, as well as the foreign voltage Receiver display indicates the reception level, the transmission code, as well as the mains voltage detection Automatic and manual sensitivity adjustment Acoustic reception signal may be switched off Auto-Power-Off function Backlight Display Additional lighting function when working under bad lighting conditions Additional transmitters are available to extend or distinguish several signals

Additional Information:

• Minimum Order Quantity: 1 Piece

Peak Hold facility

Display                   3-1/2 Digital 1999 Counts Backlit LCD

Low Battery and Overload Indication

Confi rms to IEC1010 Standards

Auto Power Off

DC Voltage              0 - 200mV/2V/20V/200V/1000V

Accuracy                  ±0.5%

AC Voltage               0 - 200mV/2V/20V/200V/750V

Accuracy                  ±0.8%

DC Current               0 - 2mA/20mA/200mA/20A.

Accuracy                  ±0.8%

AC Current               0 - 2mA/20mA/200mA/20A.

Accuracy                   ±1.0%

Resistance                0 - 200/2k/20k/200k/2M/20M/2000MΩ

Accuracy                   ±0.8%

Capacitance              0 - 20nF/200nF/2uF/20uF/200uF

Accuracy                   ±2.5%

Frequency                 0 - 2k/20k/200k/2M/10MHz

Accuracy                   ±1.0%

Inductance                0 - 2m/20m/200m/2/20H

Accuracy                   ±2.5%

Temperature             -40°C~+1000°C

Accuracy                   ±1.0%

 

Diode Test, Transistor Test and Audible Continuity test facility.

Additional Information:

• Minimum Order Quantity: 1 Piece

Exclusive One Chip Micro Controller LSI Circuit

Crystal Time base to offer high accuracy

Wide Measuring Range

Display                                         LCD With enunciators’

Range                                          50 to 12,000 FPM

Resolution                                    0.1 FPM up to 1000FPM else 1FPM

Accuracy                                      ±0.05%

Sampling Rate                             0.4 secs

Auxiliary Power Supply                230V AC 50Hz

Additional Information:

• Minimum Order Quantity: 1 Piece

Suitable to test protective device, circuit breaker,

tripping coils, relays etc.

Input                        230V Single Phase AC 50Hz.

Number of

Channel                  One

Display of each

Channel                    7 segment LED type, 4 digits

Ranges                     A. 0 - 999.9mSec

                                  Resolution 100uSec

                                  B. 0 - 9.999 Sec.

                                  Resolution 1mSec

                                  C. 0 - 99.99 Sec.

                                  Resolution 10mSec

Time Start Mode        Simultaneously starts by

                                  injection of 20V to 240V AC/DC

                                  or by potential Free Contact

Time Stop Mode        Individual stop of timer

                                  Counting with excitation of

                                  Auxiliary contacts of relay or

                                 Switch gear under test.

Additional Information:

• Minimum Order Quantity: 1 Piece

This unit confirms to the IEC61672-1CLASS2 for Sound Level Meter.NORM (Normal) PEAK mode Data manage : STORE, REAL TIME Over range indication A C Weighting FAST SLOW response Software Calibration Manual Automatic Start Modes

Measurement Range   30dB to 130dB

Accuracy                      ±1.4dB

Frequency Range        31.5Hz to 8kHz

Data Memory               129920 Data

Sampling Rate             Settable from 1 Sec. to 24 Hours.

With USB PC Interface Cable and Software

Additional Information:

• Minimum Order Quantity: 1 Piece

Data Hold Facility

Built-in Non Contact Voltage Detector

Fully Protected up to 600V DC/AC RMS in all ranges

including Frequency, Resistance, Capacitance and

Continuity test

Low Battery and Over Range Indication

Display                             3-3/4 Digits 3999 Counts Backlit LCD

Confi rms to CAT III 600V

Clamp Jaw Dia                 30mm

DC Voltage                       0 - 400m/4/40/400/600V.

Accuracy                           ±0.8%

AC Voltage                       0 - 400m/4/40/400/600V.

Accuracy                           ±1.5%

DC Current                       0 - 40/400A.

Accuracy                          ±2.5%

AC Current                       0 - 40/400A.

Accuracy                          ±2.5%

Resistance                       0 -400/4k/40k/400k/4M/40MΩ

Accuracy                         ±1.0%

Temperature                   -20°C to 760°C / -4°F to 1400°F

Accuracy                         ±3.0%

Frequency                      10 ~ 10KHz

Accuracy                         ±1.5%

Capacitance                    0 - 40n/400n/4u/40u/100uF

Accuracy                         ±3.0%

Diode Test and Continuity Test

 

Confi rms to CE, IEC 61010, CAT-III 600V

Additional Information:

• Minimum Order Quantity: 1 Piece

Features:

• Frequency of the mode 0.1Hz---1MHz
• Output waveform Sine, Triangle, Square, ±Ramp, ±Pulse
• TTL/CMOS and OUTPUT synchronous output
• Voltage Control Frequency (VCF) Capacity
• Less than 1% distortion at 10Hz-- 100 KHz
• Less than 0.5dB frequency response at 0.1Hz--- 100 KHz
• Frequency Counter 1Hz---30MHz
• Amplitude Not less than 20V p--p (open circuit)
• DC Voltage 0--±10V continuously adjustable

Additional Information:

• Minimum Order Quantity: 1 Piece

Portable instrument for calibrating process devices

and measuring process signals.

Display 3-1/2 Digits Backlit LCD

Data Hold Function

Overload and Low Battery Condition Indicator

Sources Current and DC mV

Measures Current and Power

Current Source Range       0 – 19.99 / 24mA

Accuracy                            ±0.25%

DC Milli Volt Source          -199.9 to +199.9mV

Range

Accuracy                            ±0.25%

DC Current Measurement  0 - 19.99 / 24mA

Range

Accuracy                            ±0.25%

Additional Information:

• Minimum Order Quantity: 1 Piece

Features:

• Ideal tool for checking the presence of AC High Voltages
• and AC Low Voltages in cables, wall outlet, fuses etc.
• Non Contact Voltage Detection from 50V to 132kV
• Self Check Facility
• Can be used with HOT STICK to increase the length
• Can be used for Low 50 V ~ 1.5kV
• Voltage
• Also can be used for High 1.5kV ~ 132Kv
• Voltage

Additional Information:

• Minimum Order Quantity: 1 Piece

25MHz Bandwidth

7 Inch Color TFT-LCD Display, 480*234

500MSa/Sec Sampling Rate

Channels                2CH+1EXT

Memory Depth       32kpts

6 digits hardware Frequency Counter, real time counting

display

Support SCPI programming command control

Interface                  USB Device ,USB Host, RS-232, Pass/Fail

Unique digital filter and data recorder function

Embedded 12 languages, online help, one key storing

and one key printing

Vertical Sensitivity           2mV ~ 10V/Div

8 Bit Vertical Resolution

Trigger Source                 CH1, CH2, Ext, Ext/5, AC Line

Trigger Type                     Edge, Pulse, Video, Slope, Alternative

Math Operation                +, -, x, /, FFT 

Additional Information:

• Minimum Order Quantity: 1 Piece

Hand Held, 9V Battery Operated

4-1/2 Digits 19999 Counts LCD Display

Sources

DC Voltage             0 - 199.99mV

Accuracy                 ±0.05%

DC Current              0 - 19.999mA

Accuracy                  ±0.05%

Measures

DC Voltage               0 - 199.99mV

Accuracy                   ±0.05%

DC Current                0 - 19.999mA

Accuracy                    ±0.05%

Output Adjustable      by 10 Turn POT for COARSE

                                   and FINE

Additional Information:

• Minimum Order Quantity: 1 Piece

Used to measure Acidity content of Transformer OilPortable equipment with test tubes to conductthe testsA set of chemical reactions need to be conductedto evaluate acidity of transformer oilTest Set consists of Ethyl Alcohol, SodiumCarbonate Solution, Universal Indicator, TestTubes, Graduated DropplerColor chart calibrated with neutralization numbervalues and instruction manual is also provided.

Additional Information:

• Minimum Order Quantity: 1 Piece

Features:

• Hot Neon Indicator to check Live Cable
• Detects up to 33kV by means of tube
• Rated Voltage (Max.) 33kV
• Minimum Voltage for Glow: 500V
• Audible Alarm Option available
• Available in 6.6kV, 11kV and 33kV

Additional Information:

• Minimum Order Quantity: 1 Piece