Industrial Product

Product Details:

Product Description

Digital Coal Moisture Meter- DM-300 

DM300 is high frequency moisture meter mainly used for measuring moisture content of sand, coal,coal powder, chemical combination powder and other powder materials.

 

This instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country. In other words,there is a fixed frequency inside the equipment. Once the moisture of the detected objects carried, the frequency through the sensor will be different.

 

Features:

 

1. Its integrative design convenient to carry outside for testing.

 

2. Digital display with back light gives exact and clearly reading although you stay at the somber conditions.

 

3. It is small in size, light in weight ,easy to carry out for fieldwork if needed. 4.Manual off at any time Auto power off after 5 minutes from last operation.

 Specifications:

 

Display :                               4 digital LCD

Measuring range :             0-80%

Temperature :                   0-60°C

Humidity:                           5%-90%RH

Resolution :                       0.1 or 0.01

Accuracy:                          ± 0.5%n

Power supply:                  9V battery

Dimensions:                    160×607×27??? mm)

Needle:                            235mm

Additional Information

Product Details:

ac-hrt-1 enables measurement of coil resistance of motors, transformers, etc. Under energized in ac regarding electrical appliances. The direct reading of resistance is possible with 4-wire measurement method on condition that an ac voltage is applied to electrical equipment. And the temperature of specimens is immediately calculated from measured resistance values and displayed. Thermal printer, selection control box, and pt-100 temperature sensor are available as optional items.

Product Details:

We are offering a broad range of Contamination Checking Kit, which is made employing the top quality component and advanced technology. These products are extremely employed in many places due to their easy to install and top performance. Our range is available in diverse configurations that meet on patron's demand. ·Assemble the glass / FRL Assembly over 250 ml of Filtering Flask·First, two/ three time Clean the Benzene·Take 33 cc of Oil sample in graduated glass tube

Brand: V TECHVacuum pump: 25 Lpm(liter per minute)Silicon tubing: Up to 1 MtrMembrane filter: Up to 5um micronDimensions: Up to 300 x 220 x 75 mm Weigh: Up to 2.1 kgReadability: Up to 0. 1 mg

Product Details:

Type : Thickness GagesMeasurement Object : ThicknessRange : 0-10mmResolution : 0.01mmMeasure Method : ManualReading : 001"Range : 400"Range per revolution : 100"Accuracy : ±.006" per .400"Bezel diameter : 2-1/4"Depth of jaw approx. : 12"

Product Details:

We, that is Bearing Tool Centre is a premium supplier of laboratory equipment. If you are looking for quality laboratory testing and measuring equipment, then trust us to believe our words. We value our customers and understand the importance of the equipment. Hence, we supply all the products at the doorstep of the customers on time. To believe our words, buy our VTech Dial Thickness Gauge Digital and see how it works. 

 

1 Standard throat depth : 40 mm

2 Long Range throat depth : 150 & 300 mm

3 Contact points : With / without ceramic contact points

4 Measuring Range : 0-25 mm for flat surface

5 Measuring Range : 0-50 mm for round surface

6 Least Count : 0.1mm, 0.01mm, 0.001mm

 

7 Measuring Range : 0-10mm,0.001mm

 

Product Details:

We offer a wide range of electric motor checker which is a portable diagnostictool and is widely used for rapid checking of electric three-phase machines.Any electrical fault could lead to inefficient operation or tripping of overloads,reduced machine performance. In such cases VT-22D is a perfect tool fordetecting the fault without dismantling the equipment. These electric motorchecker is also used for quality checking of stored motors before they are beinginstalled.Having three separate operating modes, these can measure different types of fault caused by:Faulty insulation Open circuits Loose connections Short circuits Rotordefects While installation, motor is tested with a high voltage of 500V DCsupplied by the instrument and possess following specifications: TechnicalSpecifications:V-TechV-TechInsulation Resistance ± 5% 0-20 Megohms at 500 VDC, max.current 0.25mAResistance ± 2% 0-60 ohms in 6 ranges (0.2 ohmsF.S.D. in range 6Inductance ± 2% 0-300mH in 6 ranges (1mH F.S.D. inrange 6)o Operating Temp. range 0 - 55 CSize 220x130x70Weight 1000gms (Approx.)Power 1.5V x 6AA size cells

Product Details:

We hold immense expertise in bringing forth high quality range of Surface Profile Gauges that are manufactured by making use of high-grade raw material and latest techniques. These gauges are prominently used by the users for measuring the peak-to-valley height of a blast cleaned surface. Appreciated for their high working efficiency, longer service life and accurate results, these instruments are widely demanded among the customers.


Measuring Range : +/-0.5 mmL.C. : 0.001 mmDisplay : AnalogueDimensions : 162x65x28 mmMaterial : Stainless steel and GlassGlass Type : Toughened glass

Product Details:

· battery analyzer bt705 battery tester designed for 12 v or 24 v batteries with a capacity of 100 to 2000 cca, such as regular flooded, agm flat plate, agm spiral, gel and deep cycle batteries, 12v & 24v starting and charging system.  · car batteries doctor adopt the advanced conductance testing technology, the premium quality copper clip and wire maintain a stable communication all throughout the testing process to provide you with reliable results!  · cranking and charging system test vt705 tester displays the decision on the starter system, cranking voltage, and cranking time in milliseconds. Also, the battery diagnostic tool can check 12v or 24v charging system to make sure the output voltage of the generator is in a regular condition. · 100% satisfactory service we promise 100% money back on this car battery tester. 7. 8ft cable allowed you to do the test from inside of the vehicle, whether you own your personal mechanic shop or private owner.

Additional Information:

• Item Code: HLD-100

Product Details:

Product FeaturesTest Voltages to 5000 VThis instrument is suited for the non-destructive measurement ofinsulation resistance in electrical systems, at machines andtransformers and in cables, as well as within the electricalequipment of, for example, locomotives, tram systems and oceangoing vessels, with eight selectable test voltages up to 5kV.Voltage measurement to 2000 VWith the voltage measuring ranges, test objects can be checked forthe absence of voltage in networks of up to 2KV. This is important forinsulation resistance measurement, because extraneous voltagesdistort measurement results.Discharge of Capacitive Devices Under TestCapacitive devices under test such as cables and coils, which mightbe discharged to test voltage, are discharged by the measuringinstrument. The drop in voltage can be observed at the needlegauge.Measurement in accordance with EN61557 part 1 and 2/IS 2992 (VDE 0413)Measuring current is equal to 1mA at a test voltage of 100V, 250V,500V and 1000V.Measurement Cables with Heavy-Duty InsulationThe measurement cables with heavy-duty insulation arepermanently connected for safety and technical reasons. Possibledanger caused by the unintentional removal of cables is thusavoided, for example when charging occurs due to capacitive testobjects.Needle Gauge with LEDsThree LEDs arranged within the needle gauge make readingeasier. The lamp lights up which is located next to the scale, whichis assigned to the selected measuring range. During themeasurement sequence, the green LED indicates whether or notthe battery charge is sufficient for the measurement.nBroad measuring range from 10KW to 1TWnEasy to read logarithmic displaynTest voltages : 100V, 250V, 500V, 1000V, 1500V, 2000V, 2500V,5000VnMeasurement to 2000V in accordance with DIN VDE 0413nMeasuring range : 100kW to 100MW (1000V)nVoltage measurement to 2000V @nGuard Terminal eliminates surface currentnPower supply with batteries or Crank Generator(Optional) or mains operated (Optional)

Product Details:

Product Description

In order to retain remarkable position in this industry, we are providing a wide array of Digital Displacement Indicator.

 

Other details:

· Digital Displacement Indicator (DG-ME-DDI-Cxx)is a microprocessor based instrument designed to measure and display the displacement directly in engineering units using LVDT sensors

· The unit is provided with full function keyboard to perform various functions such as setting calibration factor, initial zeroing of displayed value etc.

· Measurements are averaged out and displayed

· The measured data and parameters are displayed on a built-in intelligent 2 line LCD display

· The programmed parameters are stored on a non-volatile RAM

· The unit is provided with serial port to capture data on PC.

· The unit is mains operated

· The indicator is housed in a rugged cabinet

 

Product Details:

The V TECH ultimate lockout kit is the ultimate solution to your lockout needs. It comes loaded with a wide variety of lockout products that provide a solution for almost any lockout need. The kits are available in different sizes from small to large and each comes with a heavy duty polyurethane toolbox for easy transport and storage. Eliminate clutter and make the lockout process painless with the ultimate lockout kit from V TECH. The kit includes:

• 1 Lockout Box, Plastic- 19"L x 9 1/2"W x 9 1/2"H
• 2 - Lockout Scissor Hasps, 1" opening
• 2 - Lockout Scissor Hasps, 1 1/2" opening
• 2 - V TECH Aluma-Tag™ Hasps, 1 1/2" opening
• 6 - Steel Padlocks (keyed differently), 3/4" shackle
• 6 - Steel Padlocks (keyed differently), 1 1/2" shackle
• 100 - Labels for Padlock
• 50 - HS-Laminate Lockout Tags
• 2 - V TECH Circuit Breaker Lockouts
• 25 - V TECH Circuit Breaker Lockout Tab Tags
• 2 - V TECH Universal Wall Switch Lockouts
• 1 - V TECH  Multi-Plug Lockout
• 1 - V TECH  110 Plug Lockout
• 1 - V TECH Ball Valve Lockout, 3/8" – 1 1/4" Valve
• 1 - V TECH Ball Valve Lockout, 1 1/2" – 2" Valve
• 1 - Gate Valve Lockout, 1" – 2 1/2" Handle
• 1 - Gate Valve Lockout, 2 1/2" – 5" Handle
• 1 - Gate Valve Lockout, 5" – 6 1/2" Handle
• 1 - V TECH Cinch Lockout
• 1 - Training Booklet
• 1 - Magnetic Label 3 1/2" x 5"; DANGER: EQUIPMENT LOCKED OUT, DO NOT REMOVE LOCKS

Product Details:

Partial discharge instruments have two modes of Wide Band and Low Frequency. You can use it for Partial Discharge tests of High-Voltage Equipment, Insulation Materials, High-Frequency Equipment, and Power Semiconductor devices. Partial discharge Measuring Equipment can easily realize the test of Partial discharge on print-circuit boards, connectors, semiconductors, small motors and other insulation materials, to make a judgment on good / bad of them.

Product Details:

The 991 thrust transmitter is a 2-wire, loop-powered device that accepts input from Bently Nevada's 3300 NSv proximity probes and matching extension cables (available in 5 and 7 meter system length options). The transmitter conditions the signal into appropriate engineering units proportional to the shaft's axial position, and provides it as a 4 to 20 mA industry-standard signal for input to the control system where machinery protection alarming and logic occurs.

Integrated Proximitor Sensor requires no external unitNon-isolated “PROX OUT

Product Details:

 

 

·         1 no. Semi-self indicating balance, capacity 5 kg, accuracy 0. 5 gm, provision is made in this balance to suspend density basket under material pan. Balance is supplied with necessary set of weights. This balance is mounted on an angle iron frame stand.

·         1 no. Density basket.

·         1 no. Air tight container of capacity similar to that of density basket.

 

Product Description

Details:

·         1 no. Semi-self indicating balance, capacity 5 kg, accuracy 0. 5 gm, provision is made in this balance to suspend density basket under material pan. Balance is supplied with necessary set of weights. This balance is mounted on an angle iron frame stand.

·         1 no. Density basket.

·         1 no. Air tight container of capacity similar to that of density basket.

·         1 no. Water tight container to suspend density basket'

·         1 no. Gi tray of area not less than 650 cm sq.

·         1 no absorbent cloths 75 cm x 45 cm.

Specifications:

·         Weight: 800

·         Power: Hydraulic,0.75kW

·         Voltage: 380v

·         Material: Steel

 

Product Details:

Features:

• Full auto taring.
• Moderately priced.
• Ideal for testing equipments.

Options:

Peak hold:
Peak value is displayed and can be cleared by Reset Switch.

RS-232C Port:
9 Pin D connector for 3 wire serial transmission for hook up with computer.

RTC with printer port:
25 pin D connector for centronix compatible parallel printer port with real time clock.

Output:
Linear 0 to 10 V DC or 4-20 mA DC outpur corresponding to input by 12 bit D to A conversion.

Product Details:

Product DescriptionTrummeter is a Belt Tension meter Measuring Instrument precisely tensioned belts reduce belt and ball bearing wear. The Trummeter belt tension meter measuring instrument has replaced the thumb as the method used to measure the tension of taut drive belts.

Not only because it is no longer up to date, but because it is far too imprecise. What's more, you can't really record and certify thumb pressure in accordance with ISO standards. You can, however, record the measurement results gained using the Trummeter in accordance with DIN. Trummeter measures the natural frequency of a stationary, taut belt that has been tapped to make it oscillate and displays this frequency in hertz. At the same time, the strand force is calculated in newtons and also displayed. These results can be recorded in accordance with DIN EN ISO 9001 ff.

The measurement results can be displayed in different languages. The scope of delivery includes the measuring instrument and the light sensor, packaged in a practical carrying case.

Product Details:

• Instrument for measuring and checking the groove depth of grindometers
• The ideal addition to our VT2020 - 2024 Grindometer
• Easy to handle
• Easy to calibrate
• Reliable results

Product Details:

The professional digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other Mark-10 indicators.

The features an industry-leading sampling rate of 14,000 Hz, producing reliable results for extremely quick-action tests. In addition to the indicator's functions, the features high speed continuous data capture and storage, with memory for up to 5,000 readings, at an acquisition rate of up to 14,000 Hz. The also features programmable footswitch sequencing, break detection, and 1st / 2nd peak detection. Coefficient of friction unit of measurement and a user-defined unit of measurement add flexibility for specialized applications. For productivity enhancement, the indicator also features automatic data output, data storage, and zeroing functions upon the completion of break detection, averaging, external trigger, and 1st / 2nd peak detection.

The interfaces with Mark-10 motorized test stands to permit functions such as break testing, dynamic load holding, PC control capability, and more. The included Lite data acquisition software tabulates continuous or single point data. Data saved in the indicator’s memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.

Product Details:

Vacuum Tester for Filled Bottle/ Container

Operation:It consists of a piercing arrangement with Analog Vacuum gaugePiercing area is sealed beofre actual piercing takes place.When the closure is pierced vacuum is observed on dial of vacuum Gauge.Indicates vacuum in mm of Hg and Inch of Hg.
In case of digital model it displays mm of Hg unit.PEAK Reading remains on dispaly even after remooving vacuum inside container.
Specifications:Container Type : 28mm Closure with PET Bottle, Standard Glass bottle with crown & other sizes available on request.

Product Details:

The FCIT series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end Bearing.
Model FCIT load cells have Female thread mounting and measure both tension & compression load force.High Grade SS 17.4PH construction for resistance against shock and overload.Customization to fit your dimensional needs.

Model : FCITRated capacity(R.C.) : 500kgf, 1, 2, 3, 5, 7.5,10tfRated output(R.O.) : 1mV/VNonlinearity Within : 0.5% of R.O.Hysteresis Within : 0.5% of R.O.Repeatability : 0.15% of R.O.Creep : 0.05% of R.O.Zero balance : ±1% of R.O.Excitation recommended : 10V (max. excitation 15V)Terminal resistance ip - op : 350???±1%Insulation resistance bridge : 2000M???Temperature range, compensated : -10~60°C Safe overload : 120% R.C..Cable length :Ø5mm 4core, 3m4core, 3m



_______________________________________________



Compact size.These are extremely accurate and compact Tension / Compression load cell.Protection Class IP65


Model : FSRated capacity(R.C.) : 50KgfRated output(R.O.) : 2.0mV/V±1%(2,5kgf: 1.5mV/V±1%)Nonlinearity : 0.03% of R.O.Hysteresis : 0.03% of R.O.Repeatability : 0.03% of R.O.Zero balance : ±2% of R.O.Temperature effect : 0.05% of LOAD/10°CTemperature effect zero balance : 0.1% of R.O./10°CTemperature range, safe : -20~80°CTerminal resistance input : 350±50???Terminal resistance output : 350±2???Insulation resistance bridge/case : 2000M???Excitation recommended : 10V (max. excitation 15V)Safe overload : 150% R.C.Cable length : Ø5mm 4core, 3m

Product Details:

The Scuff Tester offered by us is widely used for measuring rub proofness of printed paper & board

Two contact discs rotate in contact at a same angular speed, giving constant relative velocity between all points of the disc

With interchangeable dead weight and electrically driven with digital revolution counter

Display Type: Digital

Power: 250W

Model Number: VT-3059

Brand: V TECH

Material: SS and MS.

Frequency: 50 Hz

Phase: Single Phase

Power Source: Electric

 

Voltage: 230V

Product Details:

The transparency tester is a widely used testing instrument in the V TECH and preform industries. The instrument is used for testing the transparency of a V TECH container or a Preform. As transparency is a major aspect of the quality of the V TECH products, the testing instrument helps the manufacturers extensively in ensuring the best quality of Products.

Measuring Range : 0 to 100%Resolution : 0.1Accuracy : 0.2%Size of Sample : 50 x 50mmPower Supply : 220V AC 50HzProduct Type : Metal BodyIndustry Type :Plastic, Pet, Preforms                                          Laminates
Other Criteria Checks : Physical

Product Details:

It is used to measure the highest temperature that occurs during the last 24 hours, e.g. mercury in glass thermometer. Maximum thermometer should be kept within the Stevenson screen, made up of a specially designed wooden box. It should be kept in a horizontal position, with the bulb tilted slightly downward. These are Mercury filled, range -35 degree C to +55 degree C in 1 degree C divisions indicating high and low temperatures reached between settings as well as present temperature.Mercury in a glass bulb is attached with a graduated capillary tube so that when mercury expands with increase in temperature, its value can be noted. The capillary tube has a small constriction between the bulb and the stem.
When temperature increases, mercury rises to its maximum and, therefore, the pressure due to the increasing volume of mercury is sufficient to force the mercury through the constriction. But when temperature decreases, the constriction does not allow mercury to fall back.

Product Details:

Product DescriptionOne of the test for determination of colour fastness of dyed of printed leather is the crocking test. This test is used for the determination of colour fastness against rubbing, either under dry or wet condition. In this test a moving brass finger of specified shape and size rubs against the test specimens under a fixed load. The amount of colour lost by the test specimen and the amount of colour transferred to a piece of abradant Leather fixed over the base of the moving finger are graded with the help of standard grey scales to evaluate the colour fastness of the sample under test rubbing.
A Crockmeter is used for the determination of Color Fastness of textiles against rubbing under either DRY or WET condition.
EQUIPMENT
V TECH is an advanced version of Crockmeter, which is operated by a geared motor. It consists of the Main Unit having an Oscillating Arm with a Finger. Which Rubs over the Test Specimen under a specified Load over the Test Specimen.
The rubbing finger is cylindrical in shape and has a flat base, which is covered with a piece of standard white crocking cloth which picks up the color lost by the test specimen. The crocking cloth is held over the finger with the help of a Stainless Steel Spring Clip. Motion to the finger is given by the Oscillating arm, which runs on Teflon rollers to minimize friction and to give uniform load on the
finger. The Oscillating arm is moved with the help of a Geared motor with instant braking system. A three-digit Pre -set Counter is provided to enable the desired number of rubs upto maximum of 999 rubs. The display comes o n the Digital Counter. The test specimen is held firmly over an abrasive paper with the help of Specimen Holders made of Acrylic. The equipment is build on a fine wooden base to give the stability and rigidity. The equipment is finished in fine metallic P.U. paints.
TECHNICAL DETAILS
Diameter of the finger (For all Fabrics & Textiles) :16 mm
Force on the Finger (for all Fabrics & Textiles): 9 N
Size of Crocking Cloth : 5 x 5 mm
Micro processor based counter:0 – 999, (Least Count : 1)
STANDARD ACCESSORIES
Main Unit : 01 No.: Mains Lead with Plug : 01 No.
Crocking Clothes (Pack of 100) : 02 Packets
Blotting papers (Pack of 50 No s.) : 01Packets
Flat Specimen Holder (Acrylic Plate)–For Loose Fabrics/Garment : 01 N0.
This User’s Manual : 01 No.

Product Details:

Special designed for measuring the thickness of 0-20mm beads.Clear number and scale display for clear and fast reading of measurement data.Easy to use and carry, compact and lightweight, firm and practical, high precision.A must and necessary instrument for measuring pearl thickness and beads diameter.Widely applicable to jewelry and crafts makers, quality and reliable, having long service time. 
Material : PlasticColor : WhiteShape : RoundTest Range : 0-10 mmDivision Value : 0.01 mmDisplay : Analog

Product Details:

Features :

• Measures 7 parameters
• 3 ranges for ammonia, nitrate, phosphorus and potassium
• Economical tests

Specifications:

• HI 83225 is supplied with measuring cuvets (4), batteries, 12 Vdc adapter and instructions.
• HI 83225C kit version includes HI 83225

Accessories :

• Rugged carrying case
• 100 mL and 170 mL Beaker
• 60 mL and 5mL syringes
• 1 filter-holder and 25 filters
• 100 mL cylinder
• demineralizer bottle
• 2 pipettes
• 1.5 mL spoon and active carbon for 50 tests