Measuring Instruments

Product Details:

Brand -Wolf      Meter Type -Analog     Shape -Round

Product Details:

Introduction:

Pigmy Type water current meter been designed to calculate the Velocity of water in a flowing stream or open Canal. This instrument has a pigmy cup type current meter are scaled two fifths as large as the standard type current meter, it does not have a tailing assembly and is used with the wading rod. Its range of operations is 0.3 to 3.3 meter per second. The 2 inch diameter bucket wheel contains cups a single contact closure is made each movement of the bucket wheel. The calibration chart provided with the meter gives the velocity in m/sec. First of all place the wading rod at the center of base plate & insert by screwing the wading rod as shown below. After fixing wading rod (as per the depth requirement) to base plate place it on the floor. Now unscrew the top screw of the sensor from sensor frame to detach the sensor as shown below Now attach Now unscrew the top screw of the sensor from sensor frame to detach the sensor as shown below. Now attach the sensor coupler to the sensor by screwing top screw as shown below. Now connect sensor cable to sensor terminals as shown below. Now Insert the sensor coupler to the wading rod, tighten side the bolt to make it gripped perfectly with wading rod as shown below. Now connect other of sensor cable to Digital counter / Water Velocity Logger (for detail refer to respective manual) Connect the second end of Connection cable to the sensor as shown in picture below. 
Precautions:
• Do not use current meter inside high silt content water
• After use please clean the current meter with soft cloth.

Product Details:

We are suppliers of Soil Tensiometer ( Gauge Type) Tensiometer provide a direct measure of the tension at which water is held in soil, and therefore the suction plant roots need to exert in order to extract water. This instrument comprises awater filled tube which is sealed at one end, with a porous ceramic filter at the other end. The specifications of this filter aresuch that, when buried in soil, it will allow water to flow freely through it, but not air. Tensiometer is available in standard lengths of 15, 30, 45, 60, 90, 120 cm. General use with row,tree, and field crops. Includes reservoir, air free gauge chamber, and hermetically sealed dial type vacuum gauge with dual scale of millibars (-1000 to 0) and mm Hg (-760 to 0) range.

Spacifications:

Lengths -15, 30, 45, 60, 90, 120 cm.
scale of millibars (-1000 to 0) and mm Hg (-760 to 0)

Product Details:

 Made of hardened stainless steel   Shock proof4-way measurement
Yellow indicator plates with cleablackpointslPremium TIN coated model[DCJ}

Product Details:

Product DescriptionVTD-304 Measures Ambient temperature, Dew point temperature & Wet bulb temperature Fast Response Time, Large-screen LCD and backlight, Auto Power OFF, 99 groups Data Logging.

Feature:

• Ambient Temperature Range: -20°C to 60°C; Resolution: 0.1°C;
• Accuracy: ±0.5°C for 0°C to 45°C; ±1.0°C for -20°C to 0°C, 45°C to 60°C.
• Humidity Range: 0 to 100%RH; Resolution: 0.1%RH; Accuracy: ±2.0% RH
• for 10%RH to 90%RH; ±3.0% RH for 0% to 10%, 90% to 100%.
• Wet Bulb Temperature Range: -20°C to 60°C; Resolution: 0.1°C;
• Accuracy: ±0.5°C for 0 to 45°C, ±1.0°C for -20°C to 0°C, 45°C to 60°C.
• Dew Point Temperature Range: -50°C to 60°C; Resolution: 0.1°C;
• Accuracy: ±0.5°C for 0 to 45°C; ±1.0°C for -50°C to 0°C, 45°C to 60°C.
• Accessories: Battery, Hard Carrying Case, Manual.

Product Details:

The Moisture Meter is microprocessor- control hand held moisture meter. It is electrical resitance type moisture meter and intended for rapid evaluation of moisture of corrugated boxes, paper, paper tube. This moisture meter can be used in production, Inspection control and further treatment of paper material.

Product Details:

The FT6380 measures grounding resistance simply by clamping to multiple- grounded ground wires. No auxilary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low- profile sensor can be used to clamp gorund wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on order of several mA to load currents of up to 60A

Product Details:

Application :
This tachometer is a tool used to measure the rotational speed, which, can be widely apply in electronic industry and auto industry etc. 

Specifications :
Display : LCD Non Contact Laser type Rotative velocity :2.5-99,999 RPM(r/min)Resolution : 0.1 RPM (2.5-999.9 RPM)1RPM (OVER 1,000 RPM)Accuracy : +(0.05% +1d)Sampling time : 0.8 sec. (over 60 RPM)Memcry ; max/min/last value.Measuring distance : 50-500mmBattery : 4x1.5 VAA (UM-3) BATTERY.Standard Accessories : Tachometer Operation manual 4x1.5V AA battery

Product Details:

Features:
Spring loaded travel 
Strong/ firm lock
Convenient hold function 
Metal alloy jaws with chrome finish 
3 way of reading: inch

Additional Information:

• Item Code: 0-150mm

Product Details:

Features :

for checking wall thickness of pipes

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition
 Indian or Imported

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Product Details:

Product Description

Electronic Toe Load Measuring Device (ETLMD) which isuseful for measuring & recording the toe-load of elastic rail clips in-situ on railway track.

Technical Features:

• Capacity of load cell : 2000 kg 
• Display Resolution : 1 kg 
• Display : 1 kg
• Operating Rail temperature  : 8 to 16 character alphanumeric display
• Measurement Accuracy  : (-)SoC to 70°C 
• Humidity Effect : (±) 0.5% of rated capacity ofload cell 
• Zero (Sensitivity) 6.0 : Nil : Fast return to zero.

Product Details:

• Measuring Vibration Velocity, Displacement and Acceleration.
• True RMS measurement
• Sealed Membrane key pad
• Suitable for monitoring machinery vibration caused by
• imbalance, misalignment and gear faults
• Micro Controller based
• Back Light Display
• Auto Power Off
• Battery Low Indication with text
• Pocket size and Light weight
• Displacement
• Measuring 0.1- 2800μm (0.0001-2.800mm)
• PK-PK & RMS
• Velocity Measuring 0.1 to 200 mm/s RMS &
• PEAK-PK
• Acceleration 0.1 to 200 m/sz RMS, PK-PK
• Measuring Range
• Resolution 0.1mm/s
• Accuracy ± (2% + 0.1mm/s)
• Frequency response 10-1000 HZ

Product Details:

VT-1201 Split Type Ultrasonic Vibration Measurement Equipment Manufacturer in or OEM 0~199.9m/s2 0.1~199.9m/s ; Range of displacement measuring. 0.001~1.999mm.

Product Description
Digital Vibration Meter Tester adopts a piezoelectric type acceleration sensor and is suitable for the measurement of conventional vibration of mechanical equipment. It can measure the vibration speed, acceleration, displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space Light andaviation and other fields.

RANGE: Wide measurement range of acceleration: 0.1~199.9m/s2 peak; Speed: 0.1-199.9mm/s (effective value); Displacement: 0.001-1.999mm (effective value)

HIGH QUALITY: The product adopts piezoelectric type acceleration sensor and is suitable for measurement of conventional vibration of mechanical equipment.

DUAL UNITS DESIGN: It can measure the environment temperature with 2 temperature units ( and ), you can choose a suitable one for your need, convenient and easy to operate.

MULTI-FUNCTION: It can measure the vibration speed, acceleration,displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.

WIDE APPLICATION: Widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields

Product Details:

Product Description
Vibration meter 2050 is a tool for periodic measurement of vibration onmachinery (eg. Fans ,blowers ,pumps ,compressors ,machine tools etc)
Monitoring the mechanical condition of machinery with the objective ofpreventing unexpected and sudden breakdown. A rising vibration trend can signal the need for taking corrective action before an impending breakdown
The approach to maintenance has proved extremely useful the world over in reducing unexpected plant failures and saving precious resources
Offered in sub compact surface -mount technology version, with drastically reduced and weight for truly hand-held convenience and reliability.

Product Details:

Product Description

• Support WiFi connection.
• Display method: 4.3” LCD screen display, 480X270 pixels.
• Detection method for CO2: Infrared ( NDIR ).
• Detection method for PM: Laser Scattering.
• Concentration unit for CO2: PPM.
• Concentration unit for PM: ug/m3.
• Concentration unit for HCHO and TVOC: mg/m3
• Power source: Lithium battery with 3000 mAh capacity.
• 5V DC power charging via micro USB port.
• Product weight: 235g.

Product Details:

Product Description

• 10mm (0.4”) LCD Display
• Auto Manual Shutdown
• Low battery indicator
• DC Output : 0 ~ 1.3V 10mV/db
• A'', ''C'' or ''Flat'' weighing with Slow / Fast response
• 94dB in Full Calibration at (1KHz)
• Optional RS-232 Communication (Advanced Software Program for all windows)
• Alarm Volume o/p : 30 ~ 130dB
• Alarm o/p : LED Optional Relay output Backlight

Measurement :

• LP : Current Sound pressure Level
• Leq : Equivalent continuous A sound pressure level (i.e. Arithmetically mean value in a period of time set)
• LN : Statistic analysis i.e. % of all measured values which is greater than or equal to the alarm value (Alarm set by user)
• Standard Accessory : Hard Carrying Case, Wind Ball, Screw Driver, Manual
• Optional Accessory : RS-232 Cable with Software, RS-232 USB Cable
• Dimensions : 236 x 63 x 26mm

Product Details:

Product Description

Owing to rich industrial experience, engaged in manufacturing and supplying a qualitative range of Saw Chain Rivet Spinner that is used for joining chain loops. The offered chain rivet spinners are manufactured using high-quality raw material and latest technology in conformity with the industrial standards. In addition to this, these are available in different sizes and patterns as per the varied needs of clients.

Features :

• Longer service life
• Excellent Finish
• Reliable performance

Product Details:

Product Description
VTM-1 instrument is based on the principle of photoelectric effect & D65 light source (R457) and with 45/0 as a illumination condition Meanwhile, except solution or liquid samples, instrument can be widely measured the whiteness value of any substances. VTM-1 is a portable hand- held battery-powered whiteness meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic,porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, Flour, salt, detergents, cosmetics, linen and other non-metal substances.

Features:

• Compact in size, novel in design & LCD display.
• Higher performance & ergonomic design.
• Low daft, high accuracy, nice stability ensure long-time & stable running.

Product Details:

This is  a portable testing kit in one unit, suitable to test protective device, circuit breaker, tripping coils, relays and similar equipment. The set is designed for both laboratory for field use.

Product Details:

Product DescriptionMeasurement Range:VT RTM-20-A (0-1TON-1MM-6MM DIA)VT RTM-20-D (0-20TON-6MM-40MM DIA)VT RTM-40-D (45TON-32MM-52MM)

Product Details:

Product Specification
Brand V-TECHAccuracy 1.5 dBPower Supply 1 x 9 V Battery (Pp3)Resolution 0.1 dBFrequency Range 31.5 HzDimensions Approx. 264 x 68 x 27 mmWeight Approx. 260 g

Product Details:

V-TECH MILLION MEGA OHM METER” is an ideal instrument for measuring highresistance & insulation . Since it applies a high table , IC regulated , H.T. of 100 ,200 , 300 , 400 & 500V DC across the element under test , it serves the purpose ofa Megger also . It erasures the insulation resistance of the sample under stress , bysubjecting it to the set voltage . It has a measuring range of 1 mega ohm to 10million mega ohms fc in six decade ranges & is capable 13 of reading upto 10 millionmegaohm (10 ohms) with accuracy . Op - Amp ensure low drift , low input biascurrent & high stable performance . A separate Rx - NORM - HT switch with ambercolor lamp indication facilitates to link or de - link HT with terminal . The HT canalso check by & set accuracy in HT position by observing FSD & using fine & coarseHT controls .


Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty.
Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported
Laboratory Instrument, Test Equipment,Scientific, Measuring, Precision Instrument,Analytical, Bio Medical, Survey, Electrical,Electronic Instruments ,Weather, Metrology.

Product Details:

• Programmable : Maintains the CO2(ppm) within the desired range but also
• supports calibrate and alarms.
• Double Outlets : Pls plug CO regulator or generator into WORK1, exhaust fan 2
• into WORK2.
• Plug-n-play : The CO2 controller will turn on/off the device when reaches the
• desired CO2(ppm) level.
• Digital Display : Both the measured CO2 and the desire CO2 are (ppm)
• displayed on the CO2 Controller.
• Sensor : B01 Sensor is suitable for Agricultural and Greenhouses.
• Error : ± (30 ppm+5% MV), Response Time (90%): 120 seconds.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty.
Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

Laboratory Instrument, Test Equipment,Scientific, Measuring, Precision Instrument,Analytical, Bio Medical, Survey, Electrical,Electronic Instruments ,Weather, Metrology.

Product Details:

FEATURES

* Use to calibrate the " Sound Level meter " precisely.* 1000 Hz frequency .* 94 dB Sound Pressure Level* Suitable for 0.5 & 1 inch microphone. Total harmonic distortion : 2 %.* According IEC942, Class 2 Standard* Power by 006P DC 9V battery, 2 PCs.* Durable bench type housing case.* Built-in over input protection.

FEATURES

Standard 94 dB 1000 Hz sound calibrator, useful to calibrate the " Sound Levelmeter " precisely.

Product Details:

PURPOSE WHAT ARE THEY?   There are two main types of humidity indicator cards: reversible and irreversible. Reversible WHY USE THEM?  With the widest selection of humidity indicator (HI) cards for various industry applications,Humitector™ HI Cards provide simple,  reliable,  visual indication of the relative humiditywithin a sealed package or sealed environment. Humitector HI Cards provide visual proof of the relative humidity level within a given package.




Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty.
Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  ImportedLaboratory Instrument, Test Equipment,Scientific, Measuring, Precision Instrument,Analytical, Bio Medical, Survey, Electrical,Electronic Instruments ,Weather, Metrology.      

Product Details:

Features:

• Hand Held Multifunction Four - in - one meter
• With RS-232C PC Interface facility
• Combination of Sound Level, Lux, Temperature and
• humidity meter
• Low Battery Indication
• Display 3-3/4 Digits 3999 Counts LCD
• Light 0 - 40 / 400 / 4000 / 40,000 Lux
• Accuracy ±5%
• Sensor Silicon Photo Diode with fi lter
• Sound Level range 35 - 130dB
• Resolution 0.1dB
• Accuracy ±3.5dB
• Frequency Weighting A
• Time Weighting Fast
• Humidity range 25 to 95% RH
• Resolution 0.1%RH
• Accuracy ±5% RH
• Temperature range -20° to 750°C/-4° to 1400°F
• Resolution 0.1°C
• Accuracy ±3%
• Confi rms to CE, EN-61010, CAT-II 600V

Product Details:

Product Description

Measures velocity, acceleration and displacement along with the temperature, comes complete with the magnetic Base

LCD displays measurement result and conditions directly

Measures acceleration (m/s2 peak), velocity (mm/s RMS) and displacement (mm p-p)

Selective vibration characteristic

Uses hi- sensitive vibration sensor for accurate measurements

Equipped with two probes (SHORT and LONG) to adapt to the different measurement requirements

Magnetic probe is provided, to be used for holding the sensor in un-easy conditions

Low battery indication

Auto Power Off

Backlit LCD Display

Maximum value Hold function

Measures Temperature in °C /°F

Packed in Hard Carrying Case

 

Product Details:

Clamping Force Gauges to check the life of spindles available in VT-30, VT-40, VT-50 models

Instrumentation , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. Why not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Product Details:

Product Description

A wide range of Yarn Tension Meters available with us, comes in round & pistol type models. Our range is sourced from the reliable and certified vendors of the market like SCHIMDT/ HIROSHIMA/TECKLOCK etc., who design this as per international quality standards & norms. Moreover, we test and check the entire range on several parameters to ensure quality, durability and reliability.This instrument determines load during processing of yarn while spinning and winding, followed again during warping, equipments are used and during weft winding. being very sensitive to tension they should be checked by means of tension meter. Our instruments are very sensitive, give reproducible and stable readings, if the measuring conditions are repeated, therefore it is advisable to select proper range of tension meter. We market wide range of Yarn tension meters, please contact us with your specific detail to enable us to offer suitable model. 

 

Special Features:

• The analog display shows changing and fluctuating tensions fast and enables an optimal process adjustment
• Filament guide and roller shifting mechanism ensure easy acquisition of the running material
• Large, easy to read scale (54 mm Ø)
• Everything in operator’s view: 

1. the guide rollers
2. the measured material - 
3. the readings

• Ball-bearing mounted, V-grooved guide rollers
• Each instrument is individually calibrated for highest accuracy
• Housing made of high-strength plastic

Instrumentation, is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. Why not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Product Details:

Features :

• MAX & MIN measurement
• Over range display
• Under range display
• A & C Weighting
• FAST & SLOW response
• Analog AC/DC outputs for connection to frequency analyzer or X-Y shaft recorder
• Datalogger function
• Adjustable Alarm Levels
• Backlight
• USB Computer Interface (Advanced Software Program for all windows)
• Standard Accessory : Gift Box with HardCaryingCasem,Manual,Battery, Screwdriver, Audio Plug, Windscreen,Tripod and DC 9V power supply,HTC USB with Software.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty.
Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported
Laboratory Instrument, Test Equipment,Scientific, Measuring, Precision Instrument,Analytical, Bio Medical, Survey, Electrical,Electronic Instruments ,Weather, Metrology.

Product Details:

• The instruments Powers or Measure a two-wire current loop. Four function provide the quality and accuracy of handheld calibrator : a. Precision current source. b. Measurement of a current signal. c. Power and measurement of two wire loop. d. Precision DC mV source.

• Portable instrument for calibrating process devices and measuring process signals.

• Adjustable 0-24 mA current source.

• Adjustable -199.9 mV to +1.99.9 mV DC voltage source.

• Current calibrator drives loads up to 500 ohms.

Product Details:

We are offering Wearable Carbon Dioxide Indicator to our clients.

Specification:

• Display: 3.5" LCD display
• Carbon dioxide(CO2):
• Range: 0-9999(out of scale)
• Accuracy: ±50ppm ±5%rdg
• Response time: 10s
• Range: -10.0~70.0°C / 14~158°F
• Resolution: 0.1°C/°F

Humidity:

• Range: 0.1~99.9%
• Resolution: 0.1%
• Logging memory: 12700
• Operating temperature: 0~50°C
• Operating humidity: 0~95%RH
• Power supply: 4 * 1.5V AA batteries(not included) / Power adapter
• Power adapter: AC100-240V 50/60Hz(input) 6V/2A(output)
• Plug type: US
• Item size: 14 * 10 * 3.5cm / 5.5 * 3.9 * 1.4in
• Item weight: 259g / 9.2oz
• Package size: 27 * 21 * 6.5cm / 10.6 * 8.3 * 2.6in
• Package weight: 897g / 31.7oz

Product Details:

Our polarimeter has a polarizer to produce plane-polarized light, a place for the sample through which the polarized light passes and an analyzer to measure the angle of rotation. This polarimeter is suitable for testing sugar solution and other optically active liquids.It can accommodate a tube of 220mm.

Product Details:

• High accuracy and rapid response
• Data-hold function for holding measured values
• Unit and sign display for easy reading
• Automatic zeroing
• Meter corrected for spectral relative efficiency

Features

• Maximum and minimum measurements recording
• Relative reading & Reset function
• Easy to read large backlit display.

Nunes Instruments , is  in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported
Laboratory Instrument, Test Equipment,Scientific, Measuring, Precision Instrument,Analytical, Bio Medical, Survey, Electrical,Electronic Instruments ,Weather, Metrology.

Product Details:

We are a renowned manufacturer of fine quality, highly durable Powder Density Meter which as the name suggests is used for measuring the density of various material. This is used for measuring the damping density of dry crystals, granules, particles and flakes like tea, coffee powder, pigments, chicory powder, instant coffee, milk powder, soup powder, rice, cereals, wheat, flour, sugar, wood particles, pigments, free flowing powders, metallic powders and chemicals. We offer our range at market leading prices.

Features:

• High Accuracy
• Easy to operate
• Economical

Product Details:

"V-TECH" make Acrylic Body Rotameters are mainly used for Water / Salt Water, Air, Nitrogen, Hydrogen, Natural Gas application. These are integrally machined cut in acrylic body from imported transparent acrylic blocks sheets. These are also suited with flanged or screwed connections and several options of material for the wetted parts. All our products are developed as per industry norms, using premium raw material and latest technology. In addition to this, our products can be customized as per the specifications detailed by the customers.

Metering Tube : Solid Acrylic Block.
Body : Imported transparent acrylic block. Wetted Parts : M.S. / S.S. / P.P. / Teflon.
End Connection : S.S. 304/316/PVC/PP/MS Scale : Engraved on body.
Packing : Neoprene / Teflon / Silicon.