Educational Instruments

Product Details:

V TECH Indicator Controller is designed specifically to work with

• Strain sensors like Load Cells, Torque sensors;
• Sensors with Analog Voltage /Current output like Pressure, Flow similar sensors,
• Ratiometric sensors like Rotary and Linear Potentiometers for Displacement & Angle measurement
• Pulse output sensors Rotary and Linear Encoders for Displacement & Angle measurement.

The setup sequence is simple and quick. It supports fast and high-resolution measurements. The 2.8 inch resistive touch screen display is an impressive and user friendly interface for navigating the settings and menus.

V TECH Indicator Controller can be used as Indicator Controllers for Industrial Press, Testing Machine, and SPMs etc.

Product Details:

We are offering Static And Dynamic Balancing Apparatus to our clients.

Feature:

• Independent analysis of static and dynamic balancing
• Adjustable balance weights with variable moments
• Accurate measurement of balance weight position both radically and longitudinally

The range of Experiments:

• Static balancing of system using steel balls
• Dynamic balancing of a simple rotating mass system
• Observation of effect of unbalance in a rotating mass system

Specification:

• Drive motor – F.H.P. universal motor
• Balancing weights – 4 nos with different sized drills for varying the unbalance
• Cord and container system with precision steel balls for relative weight measurement

Product Details:

We are offering Isothermal Batch Reactor to our clients.

Experimentation:

• To study the progress of a chemicals reaction and determine the kinetic parameters
• To determine the effect of temperature on reaction rate constant

Utility Required:

• Water supply
• Drain
• Electricity supply: 1 Phase, 220 V AC, 1.5 kW
• Instruments, Laboratory glassware and chemicals required for analysis as per the system adopted.

Specification:

• Reactor: Material stainless steel, Volume- 1 Ltrs. (approx.)
• Water bath: Material stainless steel, Double-wall, insulated with ceramic wool.
• Heater: Nichrome wire heater
• Stirrer (2 Nos.): Stainless steel impeller and the shaft coupled with FHP motor.
• Stopwatch: Electronic
• Temp. sensor: RTD PT-100 type
• Control panel comprises of digital temp. controller: 0-199.9°C, (For water bath
• With Standard make on/off switch, Mains Indicator fuses etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Product Details:

We are offering Plug Flow Tubular Reactor to our clients.

Specification:

• Reactor (3Nos.): Material stainless steel, capacity 1 Ltr. (Approx)
• Stirrer (3Nos.): Stainless steel impeller and shaft coupled with FHP motor
• Feed tank (2Nos.): Material stainless steel, capacity - 20 Ltrs
• Feed circulation: By compressed air
• Flow measurement: Rotameter 2 Nos. (One each for reactants)
• Piping: Stainless steel and PVC
• Pressure regulator: 0-2 Kg/cm2
• Pressure gauge: Bourdon type 0-2 Kg/cm2
• Control panel comprising of: Standard make on/off switch, Mains indicator etc
• The whole unit is assembled rigidly on a base plate and mounted on a stand
• Most of the parts are powder coated and rest are painted with auto paints

Product Details:

 

Features:

• The main structure is made by mild steel (MS) tube frame.
• Outer parts covered by SS Sheets.
• SS hopper with feeding Screw
• Hopper & Cutter Driven by 1H.P. AC Motor each.
• Main Motor of 7.5H.P.
• Screws are made up of alloy steel.
• Die head, bolts and nuts are of high tension
• Production capacity 50kg /hr.
• It is continuously extruder specially design with main bearing housing fitted with good made bearing.
• The main structure is made by mild steel (MS) tube frame.
• Outer parts covered by SS Sheets.
• SS hopper with feeding Screw
• Hopper & Cutter Driven by 1H.P. AC Motor each.
• Main Motor of 7.5H.P.
• Screws are made up of alloy steel.
• Die head, bolts and nuts are of high tension
• Production capacity 50kg /hr.

Specifications:

• Voltage: 220-340V
• Dimension(L*W*H): Max: 20500X3500X4300mm
• Weight: 5T

Request
Callback

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Transport
• Production Capacity: 50 To 200 kg
• Delivery Time: 1 week

Brand : V TECH

Capacity : 100 to 200 Kg

Installation Services : Yes

A.C Drive Power (hp) : 1 HP AC Motor

Main Motor (Hp) : 25 HP

Condition : New

Automation Grade : Automatic

Product Details:

We are offering Fluid Friction In Pipes Determination Unit to our clients.

Experiment:

• To determine the losses due to friction in pipes

Utilities Required:

• Electric supply 0.5 kW, 220V AC, Single phase
• Water supply tap water connection ” BSP distilled water @ 60 liters (optional)
• Floor area with drain facility

Specification:

• Pipes (2 Nos.): Material GI of ½” & 1” diameter
• Pipe test section length: 1 m.
• Instruction manual

Product Details:

Product Details:

In line with clients' diverse requirements across the country, we are offering an excellent range of Methane Gas Monitor. This monitor is designed at our advanced manufacturing unit using the best quality components and latest technology in conformance with defined quality standards. It is used to industrial hygienists, occupational health and safety personnel and indoor air quality professionals to assess air quality in the workplace in accordance with state and national guidelines. Being a quality-oriented organization, we assure our clients that this monitor is excellent on counts of durability and quality.

Features:

• Sturdy structure
• High functionality
• Low maintenance cost

Application:

• Compressed Air, Vacuum or any Gases Leak Detection
• Mechanical inspection
• Stream Traps Testing and Maintenance
• Valve Testing.
• Microcontroller based embedded intelligent instruments
• 128 x 64 Graphics LCD Display
• Diffusion or Auto Suction Sampling Mode.
• Long Life Rechargeable Li-Ione Battery
• Data Logger with RS 232 and USB Computer Interface
• Personal Monitoring
• Confined space entry
• Pulp & Paper
• Chemical Plants
• Refineries/Petrochemical
• Hazardous Area
• Water/West water Treatment
• Fire Services
• Mines

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 100 per month
• Delivery Time: 1-2 Week
• Packaging Details: Normal packing with thermocol

Product Details:

We are offering Motorized Gyroscope to our clients.

Feature:

• Demonstrates relationship between applied torque & precision rate along with direction of rotation
• Gyroscopic couple easily verified by an arrangement of weights
• Precisely balanced rotor
• Completely portable & suitable for classroom demonstration
• Observe the relationship T = I. W. Wp

Introduction:

Nowadays Gyroscope is a very important tool used for various controls in high technology vehicles. Therefore the study of Gyroscope is of high importance for the modern engineering student.

Specification:

• Disc rotor – 30 cm diam, 10 mm thick approx
• Drive – AC/DC Single phase motor. Fractional HP 6000 rpm
• Overall size – 30 cm base diameter, 5 cm height
• Approximate weight – 30 kg

The range of Experiments:

Observation of gyroscope behavior ( Two laws or stability)

• Experimental justification of the equation T= I w wp

Service Required:

• AC 220 V, 50 HZ supply
• Hand techno meter
• Hand techno meter is not supplied along with the unit but it can be made available at extra cost. Please specify clearly while ordering

Product Details:

We are offering Rotameter Apparatus to our clients.

Experiment:

• To determine the coefficient of discharged through Venturimeter and orifice meter. To measure discharge through Venturimeter, Orifice meter, and Rotameter
• To calibrate the Rotameter.
• Utilities required
• Water supply & drain
• Electricity 0.5 kW, 220V AC, Single phase technical

Specification:

• Electric supply: 230V 50Hz. With proper earthing
• Exterior material: Stainless steel plate baked enamel
• Temp. range: -70 to 150oC
• Power: Electronic, AC 1 phase 220V; 3 phase 380V 60/50

Other Information:

• Pay mode terms: L/C (Letter of credit), T/T (Bank transfer)
• Port of dispatch: India

Product Details:

We are offering Universal Vibration Apparatus to our clients.

Feature:

• Total 11 experiment can be done on a single frame
• Various concepts & phenomena are clearly understood by this equipment
• Use of digital rpm indicator clearly shows the speed of motor
• Special arrangement for plotting amplitudes of vibrations by a strip chart recorder
• Special arrangement for changing the damping positions

 

Specification:

• Model: Any
  
• Properties: Rehabilitation therapy supplies
• Drive: D.C.-0.25 HP 0-1500 RPM
• Material: GI of 7/25” & 1” diameter

The Experiments are:

• Oscillations of simple pendulum
• Oscillations of compound pendulum
• Radius of gyration of bi-filler suspension
• Undamped torsional vibrations of single rotor system.
• Torsional vibration of double rotor system
• Free vibrations of helical coiled spring
• Free vibrations of spring mass system
• Forced damped vibrations of spring mass system
• Verification of dunker ley's rule
• Forced damped vibrations of simply supported beam at various amounts of damping. All the experiment units and accessories can be suitably fitted to a sturdy frame

Product Details:

We are offering Whirling Of Shaft Apparatus to our clients.

Specification:

• Shafts made from steel & of the – following nominal dimensions.
• Dimensions mm in length mm- 4.76mm or (3/16)” 900 or (36) 6.35mm or (1/4)” 900 or (36) 8 mm or (5/16)” 900 or (36)
• Drive ‘PROMPT’ make single phase AC/DC fractional HP 6000 RPM.
• Dimmer stat for controlling of Z Amps speed.

Feature:

• Unique model on which various nodes can be observed for different shaft size
• On this equipment, various nodes can be observed by changing end conditions
• Easy to demonstrate
• Guards for fixing the nodal positions

The range of Experiments:

Display of the various modes of the whirl for a range of shafts with –a) Both ends directionally Free) One end FIXED and the other FREE. Modes of vibration can be studied & the frequency can be measured in each case.

Experimental Procedures:

The speed of rotation of shaft can be measured by use of a Tachometer(Not supplied with the unit.) When the shaft is in the second mode of whirl, the Tachometer may use for accurately determining the nodal position. A stroboscope can also is for speed measurement ( Not supplied with the product.)It is necessary to change the shafts after each experiment. During whirling the shaft is subjected to permanent deformation.

Service Required:

• AC 220 V., 50 HZ. Supply
• Hand tachometer
• Stroboscope

Product Details:

We are offering V-tech Acrylic Body Rotameter to our clients.

Specification:

• Fluid: Liquid & gases
• Density / Sp. gravity: Up to 1.85Viscosity: Up to 100 cp
• Design temperature: Up to 40 degree centigrade
• Design pressure: Up to 6 Kg/cm2
• Measuring range: 2.5 to 15,000 LPH of water / Liquid 0.1 to 525 Nm3/hr of air/ Gas NTP
• Line size: Up to 1" to 3" NB
• End connection materials: SS304 / SS304L / SS316 / SS316L PTFE / PVC /PP
• Accuracy: ± 2% of FSD & ± 1.5% on request

Product Details:

We are offering Bottle Burst Tester to our clients.

Specification:

• 28mm PCO PET Bottle (other sizes available on request)
• Diameter of bottle 200mm height 400mm
• Output on analog pressure gauge
• Robust design for reliability ensures long service life
• Requires 16 bar inlet air for operating system and 0-­16 bar/ 225 PSI inlet Air
• 0-­16 bar/225 PSI inlet Air for pressurizing bottle
• 230 VAC Single phase supply for bursting test

Product Details:

We are offering Petrol Engine Single Cylinder Test Rig to our clients.

Experimentation:

• To determine brake power
• To determine fuel consumption
• To determine specific fuel consumption
• To determine to brake thermal efficiency

Utility Required:

• Electricity supply: Single phase, 220V AC, 50 Hz, 5-15 amp. Combined socket with earth connection.
• Water supply: Continuous @5LPM at 1 Bar pressure.
• Floor drain required
• Petrol : 5 liters
• 2T Engine oil : 2% of Fuel
• Engine oil : SAE 20W40; 500 ml (approx.)
• Exhaust emission
• Floor area: 2m x 1 m

Specification:

• Type of engine: Single cylinder, two stroke, air cooled, manual start, self lubricating, petrol engine (Bajaj make new engine)
• Type of loading: TD-01A - Rope brake dynamometer
• Torque measurement: By brake drum and spring balances TD-01B - Eddy
• Current dynamometer Torque Measurement: By spring balances
• Fuel measuring system: Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement
• Air intake measuring system: Air tank fitted with orifice and manometer
• Exhaust gas calorimeter: An exhaust gas calorimeter, made of stainless steel will be provided for calculating heat carried away by exhaust gases
• The body of the calorimeter is insulated with ceramic wool and cladded by Aluminum foil
• Digital temperature indicator with temperature sensors at appropriate position will be provided
• RPM measurement: Techometer
• Temperature measurement: Digital temperature indicator with multi-channel switch
• Temperature sensors: K-Type thermocouple
• Instruction manual: An ENGLISH instruction manual will be provided along with the apparatus The whole setup is well designed and supported by a good quality painted rigid M.S. structure

Product Details:

We are offering Refrigeration Test Rig to our clients.

Experimentation:

• To calculate refrigerant capacity.
• To Study the Vapor compression refrigerator cycle.
• To Calculate the coefficient of performance and draw the P-H diagram.

Specification:

• Compressor: Hermetically sealed compressor
• Capacity 1/3 Ton, Kirloskar make
• Agitator: Compatible capacity
• Condenser: Air cooled compatible to 1/3 Ton compressor
• Condenser cooling fan: Compatible capacity with permanently lubricated motor
• Evaporator: Made of stainless steel, insulated with ceramic wool/P.U.F
• Expansion device: Capillary tube, Compatible capacity
• Pressure gauges: 2 Nos
• Safety control: Overload and over current protectors for compressor and time delay circuit
• Temperature sensor: RTD PT-100 Type
• Control panel comprises of:
• Digital voltmeter: 0-300 V
• Digital ammeter: 0-5 Amp
• Temperature measurement: Digital temperature indicator with multi-channel switch
• Instruction manual: An ENGLISH instruction manual will be provided along with the apparatus
• All other accessories like Hand shut off valves, filter drier and thermostat will be provided
• All the accessories will be mounted on a rigid base frame made of M.S. and it will be powder coated

Product Details:

We are offering Snap and Button Pull Out Tester to our clients.

Specification:

• Capacity: 30 Kg (Other on request)
• Least count: 250 Grams
• Grips as per the button samples

Product Details:

We are offering Split Air Conditioning Test Rig to our clients.

Experimentation:

• To study the vapor compression air conditioning cycle
• To calculate coefficient of performance- (COP) by the use of P-H diagram

Utility Required:

• Electric supply 5A-220 V AC
• Floor area : 1.5 m x 1m

Specification:

• Compressor: Hermetically sealed compressor
• Capacity 1 Ton,V-Tech make
• Condenser: Air cooled compatible to 1 Ton compressor
• Condenser cooling fan: Compatible capacity with permanently lubricated motor
• Pressure gauges: 2 Nos
• Evaporator: Compatible to 1 ton, made of copper tube and aluminum fins fitted with compatible capacity fan
• Safety control: over load and over current protection for compressor with time delay circuit
• Expansion device: Capillary tube compatible capacity
• Temperature sensor: RTD PT-100 Type
• Temperature measurement: Digital temperature indicator with multi-channel switch
• Instruction manual: An ENGLISH instruction manual will be provided along with the apparatus
• All other accessories like Hand shut off valves, filter drier and thermostat, pressure gauges will be provided
• All the accessories will be mounted as rigid base frame made of M.S. and it will be powder coated

Product Details:

We are offering Tensile Testing Machine to our clients.

Specification:

• Max. capacity: 500kgf
• Readability/Least count: 0.1Kgf
• LED display
• Accuracy: ± 0.5%
• Peak hold locking
• Maximum traverse between grip to grip: 600 mm
• AC drive for variable speed 50 mm/min to 500 mm/min
• Forward and reverse function.

Product Details:

We are offering Two-Stroke Single-Cylinder Engine Test Rig to our clients.

Specification:

• Power type: Diesel
• Usage: Water Well
• Type: air and pump,trailer mounted

Additional Information:

• Item Code: TD-08

Product Details:

We are offering Wall Thickness Gauge to our clients.

Specification:

• Display update rate: 4, 8, 16 & 20 Hz.
• Resolution: 0.001 or 0.0001” (0.01 or 0.001mm), selectable
• Display: Full VGA (640 x 480 pixels) transflective color LCD.
• Data logger: Internal file-- based alphanumeric data logger.
• Data storage: On board & removable 2GB memory card.
• Data output: USB 2.0 peripheral port.
• Onboard reports: Min, Max, SD, Mean, Median, File
• Comparison calibration: Two point standard calibration and up to 8 reference points differential
• Mode: Displays difference between actual reading and the preset reference value.
• Alarm mode: High & low alarms.
• Line power: 100/120/220/240 VAC, 48--62 Hz Metric/English: Inches or millimeters.
• Languages: English, Japanese, German, Portuguese, Dutch, Polish, Russian, Hungarian, Czech, Italian, French, Spanish, Swedish, Norwegian, Chinese.
• Operating temperature: 00 to +500 (+320 to +1220)
• Dimensions: 236mmX 167mmX 70mm Gage Weight: 3.72 lbs / 1.68 Kg

Thickness Range and Accuracy:

Target ball thickness range calibrated diameter (with standard probe) accuracy

• 1/16” 0.0001-- 0.0800” (1.58 mm) (0.001-- 2.030 mm)+ 3%*
• 1/8” 0.0001-- 0.2400” (3.17 mm) (0.001-- 6.100 mm)+3%*
• 3/16” 0.0001-- 0.3600” (4.76 mm) (0.001-- 9.100 mm) +3%*