Testing & Measuring Equipment

Product Details:

This breath analyzer with Inbuilt printer VTA 50 is mainly known for rough and tough use.

Features:

1. Fuel cell sensor with 2.8 inch touch screen
2. Inbuilt thermal printer with 20,000 memories
3. Data collection report using PC software utility.

Specification:
Measurement Mode: Active Mode and passive mode
Sensor type: Fuel cell sensor
Display: 2.8 inch full graphic TFT display
Mouth pieces: Yes
Measurement Range: (0-550)mg/ 100ml BAC

Product Details:

This Digital Water Current Meter is used to measure Velocity of water flow directly in m/s. The stainless steel spindle carrying the cup wheel freely rotates in the bearing assembly. The magnet and reed switch assembly produces one pulse per rotation. The rotation of the Water Current Meter is sensed by sensor & gives pulsed output signal. The Digital Datalogger Unit consists of latest technology Microprocessor & 16 x 2 alphanumeric LCD which displays water flow velocity directly in m/s alongwith date & time. The resulting signal from Current Meter processed by microprocessor assures maximum possible accuracy and provides special functions like storing velocity at different position across channel, different depth (15 to 200 cm) alongwith Date-Time stamp, which is stored in its internal non-volatile memory. which stores last 500 data to its internal memory.  On PC user friendly Microsoft Windows based software is supplied for downloading data from Memory module in spreadsheet / ASCII  format for further analysis. The Datalogger can be programmed according to the velocity formula supplied with Current meter when calibrated. This instrument is suitable for most general measurements in analysis of water dispatch quantity in Canals & Rivers,  Agricultural  Investigations  &  many  more  applications.

Product Details:

We bring forth a comprehensive assortment of Propeller Type Water Current Meter that is manufactured in compliance with the international standards as per IS 3910 1966. This meter is particularly devised for determining the velocities of the flowing water. In this, the current meter is hovered in water with a cable by using a wading rod and sinking weight. Then, with the help of multiple propellers (available in measuring range up to 6 meter per second), stream flow velocities are measured from 0.3 to 3.5 meters per second. One can also connect current meter with an automatic counter.

Appreciated for :
Rust resistance
High durability
Easy installation
Trouble free operation
Dimensional accuracy

Applications :
Research centers
Government sectors
R&D
Universities
Chemical industry
Metrological departments
Pharmaceutical industry

Product Details:

Product Specification
Grade AutomaticMaterial Mild SteelPhase Single PhaseFrequency 50 HzSurface Finish Powder Coated

Product Details:

Sensor- Fast Fuel Cell
Measurement Range- 0-100mg/ 100ml
Measurement Time- Minimum 1 second, adjustable
Zeroing time- <5 seconds
Blow volume- 1.0L or according to customer requirement
Display- Digital and full graphic backlight display
Data store- Up to 50' XJ measured value
Real Time Clock- No

Product Details:

Material - Mild Steel,
Frequency- 50Hz
Voltage- 220V
Usage- Industrial

Instrumentation, is in the field of Instrumentation Sales Service & Repairs with 40 years of experience.  We provide service & repairs to your old high precision instruments and equipment.  We provide cost effective service & Repair to any brand, any make instruments  with service warranty. W hy not try once?

Instruments of Any Type, Any Make, Analog/Digital, Any Condition  Indian or  Imported

 

• Laboratory Instrument, Test Equipment,
• Scientific, Measuring, Precision Instrument,
• Analytical, Bio Medical, Survey, Electrical,
• Electronic Instruments ,Weather, Metrology.

Product Details:

We are offering Bottle Burst Tester to our clients.

Specification:

• 28mm PCO PET Bottle (other sizes available on request)
• Diameter of bottle 200mm height 400mm
• Output on analog pressure gauge
• Robust design for reliability ensures long service life
• Requires 16 bar inlet air for operating system and 0-­16 bar/ 225 PSI inlet Air
• 0-­16 bar/225 PSI inlet Air for pressurizing bottle
• 230 VAC Single phase supply for bursting test

Product Details:

The Equipment consists of a circular base with two vertical guides.  The hammer of weight 13.75 ± 0.25kg can be raised to fall freely down the vertical guides.  The height of fall can be adjusted through 380 ± 5mm.  The hammer is provided with a locking arrangement.  The hammer falls freely to the base and is removable for emptying.  Supplied complete with metal measure 75mm dia x 50mm high and tamping rod 230mm long x 10mm dia with/without blow counter.

Product Details:

FEATURES :

• Acrylic Measuring Cylinder Holder with Rubber cushioning.
• Maintenance free AC Motor 30 RPM.
• Direct Stroke setting eliminates the t dious calculation of Timer Mode
• Microprocessor based counter with non
• In power failure, the non-volatile memory of the microprocessor remember the last mode of operation.

Product Details:

The setup consists of catalyst packed column of Stainless Steel. Reactant from a fed tank is fed to the reactor through liquid distributor, fitted at one end of the column. Some part of product is recycled to the reactor using a low capacity sophisticated pump or by over head tank system. Rotameters are provided to measure the flow of feed & recycled product. The feed rate and recycle product ratio can be manipulated by the respective needle valves of the rotameter. Samples can be taken periodically from the top outlet of reactor at another end. An arrangement is made to carryout the reaction at Isothermal conditions by circulating the hot water in the outer jacket of the packed bed reactor. Special care is taken for proper mixing of feed & recycle product before its entry to the reactor. A magnetic drive pump made up of poly propylene is used for circulation of feed

Product Details:

Our organization has gained recognition as a  ourishing organization for providingDetector Cart that is used in pharmaceutical industry. The offered detector cart ismanufactured using the best quality components and progressive technology underthe vigilance of adroit professionals. Our provided detector cart can be availed indifferent sizes and speci cations as per the demands of our clients. Besides, ourvaluable clients can avail this detector cart from us at nominal prices.Features:v Sturdy constructionv Corrosion resistancev Precisely designed

Product Details:

Tube bursting strength tester for testing tubes for their internal pressure bearingcapacity. The machine includes a digital preset able timer, a pressure gauge and a pressure regulator. For operator safety is provided a sliding clear acrylic guardwith a limit switch to shut down the machine if the guard is opened during testand a vent silencer to lower the dB when the tune burst.

Product Details:

With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high-quality Thermocol Hot Wire Cutter.

Product Details:

Tensile Strength Tester is electrically operated and is used to check the tensile strength. The accuracy of the machine is with in permissible limits as par IS:1828. The test specimen is held between two grips. The elongation is measured as the displacement. Models available from 10 kg-f to 5000 kg-f.

Features:

• Max. Capacity: 10/250/1000/5000kg-f (other on request).
• Measurement range: 300 to 550 Mpa
• Least count: 0.5 kgf
• Wires will be of 1mm, 0.9mm and 1.2mm thickness
• Tensile, Elongation, Bend, Compression tests With PC Interface (Computerised)
• Accuracy: ± 0.1%.
• Peak hold locking.
• Units available in Kg & N.
• Maximum Traverse between grip to grip: 1000 mm (other on request).
• Grips inclusive as per the test specimen.
• AC drive for variable speed (Optional).

Specification:

• Computerized interface will allow you to see the breaking point value compressive length, graph for breaking point, Max. & min. Load value, Elongation etc.
• Company name, batch no., date & time, test no. etc. will be indicated in the report & can be saved in the computer for future.
• Latest version laptop & printer is included in this offer along with pre installed genuine software you will work on.
• You can email/print test reports through software.
• Tensile testing machine will be fully operated through computer & all test results will be saved in system memory automatically.
• Graph between load-elongation/time-load.

Product Details:

Product Specification

Material SS
Usage/Application Industrial
Brand V- TECH
Surface Finishing Polished

Product Details:

Product Description

Vialit adhesion test apparatus. Used to assess the adhesion property of aggregates. The method is a check on the adhesion of aggregates to be applied to the surface of wearing course rolled asphalt. Complete with a metal basement with three vertical pointed rods to hold the flat steel plate, 50 cm. High vertical rod with a slot at the upper end for the steel ball to drop, a 512 g steel ball, 6 metal test plates and a hand-operated rubber wheel roller. The mechanical aggregate deployment should be ordered separately.
Features 

• Flat Steel Plates, 6 pcs.
• Steel Ball, 512 g.
• Rubber Wheel Roller, hand operated.