Electrical & Electronic Instruments

Product Details:

Description

• Data Hold facility
• Displays test result and battery voltage on the same screen
• LOCK Button for continuous HANDS FREE measurement
• Both Earth Resistance and Earth Resistivity can be measured
• Can be used in 4 Terminal and 3 Terminal configurations
• Display : 4 Digits EXTRA LARGE Backlit Dual LCD Display
• Earth Resistance Range : 0 - 10/100/1000 Ohms
• Accuracy : ±2%
• Low Resistance Range : 0 - 200 k.Ohms
• Accuracy : ±2%
• DC Voltage : 0 - 1000V
• Accuracy : ±0.8%
• AC Voltage : 0 - 750V
• Accuracy : ±1.2%
• Complies with CE, CAT-III 1000V
• Complete with Testing Kit
• Re-Chargeable Battery and Battery Charger can be provided at extra cost

Product Details:

We are offering Universal Data Logger to our clients.
 

Specification:

 

Product Details:

• This precise instrument measures AC Resistance and compares it to identical windings, detecting the flaw without having you to dismantle the motor
• Operates best on ploy phase machines or in machines with more than two identical windings like general motors and transformers
• Portable, Compact, it is easy to carry.
• It operates eve on a 9V Battery
• Sturdy and long lasting this fault detector will see you through the most complex and tough problems
• This instrument does not require any calculations

Product Details:

Power factor meters are microprocessor based instruments that measure the power factor of a leading or lagging load current. The power factor is measured on a four quadrant basis depending on the nature of the load and the dicrection of power flow.These meters are suitable for direct line applications or for use in HV system in conjuction with suitable PT's having a 110V secondary.

Product Details:

V-Tech Auto Ranging Digital Micro Ohm Meter is a compact high reliability 3  ½ digit instrument suitable for measurment of resistivity of copper wires from 7SWG to 50 SWG resistance of cables, windings, coils, heater elements & contact resistance of switches, relays etc. Emphasis in the design of this instrument has been to provide quick, stable & repetable readings of resistance. The instrument uses 4 terminal measurement so that resistance of test leads & contact in eliminated from test results. Actual value of resistor is directly displayed on seven segment 12.5mm display. Automatic resistance range selection from 1 micro ohm to 19.99 k ohm

Product Details:

Features:

• 3½ digits LCD display
• Accurate measurement
• Easy to configure
• Easy to use
• Feather touch buttons
• 1999 count
• Displays when there is overload (OL)
• Approximately 100 hrs of Battery life
• Used For: Research purpose, Navigation, Industrial application, Detecting electric field pollution

Product Details:

Features:

• Frequency of the mode 0.1Hz---1MHz
• Output waveform Sine, Triangle, Square, ±Ramp, ±Pulse
• TTL/CMOS and OUTPUT synchronous output
• Voltage Control Frequency (VCF) Capacity
• Less than 1% distortion at 10Hz-- 100 KHz
• Less than 0.5dB frequency response at 0.1Hz--- 100 KHz
• Frequency Counter 1Hz---30MHz
• Amplitude Not less than 20V p--p (open circuit)
• DC Voltage 0--±10V continuously adjustable

Product Details:

DC Tachogenerators is widely used in applications for feedback and display purposes. They have high linearity, stability and reliability for successfully meeting hostile industrial environments. These also give accurate DC voltage output proportional to speed of its mover. Available in lightweight and compact features, our tachogenerators have a speed up to 10000-rpm and have voltages of 4V to 200 V / 1000 rpm.

Ensure long life, minimum voltage drops, and spark free commutation.Pre lubricated and sealed precision ball bearing for long maintenance free operation.Brush holders and brushes designed to ensure smooth movements, equal brush tension and spark free operation.Electrolytic grade copper segments molded and machined to close tolerances in commutator for spark less commutation and minimum wear.Use of mica insulation between segments to offer maximum dielectric strength and stability.Armature built with special silicon steel stampings and wound with polyester grade class 'F' enameled wire and impregnated for high electrical and strength.Armature dynamically balanced for vibration free rotation, sparkless commutation and low ripple content.Easy accessibility of brushes and commutator for maintenance.Good finish, corrosion free outer body.

Product Details:

Mainly used for testing the DC parameters of semiconductors such as diode, tTansistor, controlled silicon and fi eld effect transistor.It also can be used to test the withstand voltage of capacitor, protection voltage of Varistor and isolation of electrical. It can test 78 and 79 series three-terminal voltage regulator Measuring forward voltage, reverse voltage, forward saturation voltage Drop,amplifi cation factor, reverse leakage current of various crystal diode, audio, Silicon controlled rectifi er(SCR), fi eld effect transistor(FET). Measuring rated working voltage of chemical capacitor,terylene capacitor,Ta capacitor,Leaded multilayer ceramic capacitor,high voltage lacker. Measuring protection voltage of varistor. Measuring starting voltage of neon bulb, neon lamp. Measuring constant voltage value of 78,79 series three-pole circuit.

Product Details:

Features:

• Automatic Test with PC through RS 232C interface
• Temperature rise test of electric coils under energizing AC voltage max 450V
• AC Max 700V (sine wave) is available by using an optional adaptor.
• By using an optional thermal printer kit, print-out of measured values and temperature conversation value is possible. Also, print-out every given time is available with an interval mode.

Product Details:

MEASUREMENT SPECITICATION

• Operating temperature/ humidity : 0 ~ 40ºC ≤ 80%RH
• Storage temperature/ humidity : -20ºC ~ 60ºC ≤ 75%RH
• Allowable altitude height : ≤ 2000m
• LCD display : 3-½ digits display
• Operating voltage : 230V 50Hz + 10% - 15%
• Grounding Resistance : Maximum 50Ω
• LED indication : P-E/ P-N LED green light means wiring correct. Red light means wiring wrong.
• Product size : 165 x 140 x 80mm
• product net weight : 575G (Without test lead)

 

Product Details:

Features:

• 1 GSa/s real time sampling rate, 50 GSa/s equivalent sampling rate
• Equipped with a high precision multimeter (DCV/I, ACV/I, continuity, and more)
• 3 kinds of cursor modes, 32 automatic waveform measurements
• 5.7 inches color TFT-LCD
• Supports trend plotting and long-duration data recorder function
• Completely isolated oscilloscope input channels, including oscilloscope and multimeter channels
• Combines the functions of an oscilloscope, multimeter and recorder in-one
• Oscilloscope isolation level: CAT II 1000 V and CAT III 600 V
• Quick waveform printing and USB storage
• 60/100 MHz bandwidths, 2 input channels, 2 Mpt memory depth

Product Details:

The VTA3000X-R real-time spectrum analyzers are powerful and Flexible tools for complex RF signal monitor and analysis. With a capability of 40 MHz analysis bandwidth and 7.2 μs 100% POI, the analyzer can provide multi-dimensions data displays, advanced triggering, and RF data capturing, to solve modern RF spectrum challenges, like hopping frequency, conflict channel, spectrum interference, etc. They also provide standard tracking generator for network analysis, optional wideban d digital modulation analysis, and EMI pre-compliance test.

Applications include broadcast monitoring/evaluation, cellular site, IoT,WiFi, Bluetooth surveying, research and development, education,production, and maintenance.

These powerful instruments are even more useful with the addition of free Vector Network Analysis (VNA) and Distance-to-fault (DTF) functions included. Now, you can perform critical real-time analysis and RF device characterization with one instrument!

Features

• Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz / 5.0 GHz / 7.5 GHz
• VNA and DTF included
• -165 dBm/Hz Displayed Average Noise Level (Typ.)
• -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)
• Level Measurement Uncertainty < 0.7 dB (Typ.)
• 1 Hz Minimum Resolution Bandwidth (RBW)
• Preamplifier and Tracking Generator Standard
• Vector Network Analyzer Mode Standard
• Distance to Fault Mode Standard
• Up to 40 MHz Real Time Analysis Bandwidth
• 100% POI 7.20 s, Dynamic Range 60 dB
• Multi-view for Density, Spectrogram, PvT, and multi trigger and FMT
• Modulation Analysis (Opt.)
• Reflection Measurement Kit (Opt.)
• EMI Filter and Quasi-Peak Detector Kit(Opt.)
• Advanced Measurement Kit (Opt.)
• 10.1 inch Multi-Touch Screen , Mouse and Keyboard supported
• Web Browser Remote Control on PC and Mobile Terminals and File Operation

Product Details:

VTG5000X series of signal generators can generate analog and vector signals, and have a frequency range of 9 kHz to 4 GHz/6 GHz. They feature the industry-leading performance in phase noise, spectral purity, bandwidth, EVM, output power. The internal IQ modulation generator and waveform playback function make it easy to create even the most complex signal types. They also cover the most important RF band for digital wireless communications and include standard waveform files.

Features:

• Frequency up to 4 GHz/6 GHz
• 001 Hz frequency setting resolution
• Maximum output power up to +26 dBm (typ.)
• Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.)
• User programmable flatness correction
• Provides AM, FM, PM analog modulation with internal, external or Int+Ext source
• Single pulse, double pulse and pulse train generator (option)
• Internal IQ modulation with 150 MHz modulation bandwidth with perfect in-factory
• calibration
• Built-in digital communication standard waveform les such as 5G-NR,LTE, WCDMA,
• WLAN, Blue-Tooth CDMA
• Internal Custom mode generate common IQ signals such as QAM, FSK, ASK, MSK
• Analog differential I/Q outputs
• External analog I/Q input
• USB-power meter measurement
• 5 inch TFT capacitive touch screen, mouse and keyboard supported
• Web browser remote control on PC and mobile terminals
• Standard interface includes USB Host, USB Device (USB TMC), LAN (VXI-11, Socket, Telnet). Optional interface: GPIB

Product Details:

The VTA1000X series spectrum & vector network analyzers are powerful and Flexible tools for RF signal and network analysis.

*New VTA1000X instruments feature approximately 100 hours of free trials of these options. The trial timer is running when the instrument is powered on. After the trial has expired, the function will be disabled/grey 
With a frequency range to 7.5 GHz, the analyzer delivers reliable automatic measurements and multiple modes of operation: the base model are a spectrum analyzer and a vector network analyzer, optional functions include a distance-to-fault locator, a vector signal modulation analyzer. Applications include broadcast monitoring/ evaluation, site surveying, S-parameter measurement, cable and antenna testing, analog/digital modulation analysis, EMI pre-compliance test, research and development, education, production, and maintenance.

Features:

• Vector Network Analysis from 10 MHz – 1.5 GHz / 100 kHz – 3.2/7.5 GHz (Now
• included as standard)
• Distance-to-fault (Optional)
• Frequency Range from 9 kHz to 1.5 / 3.2 / 7.5 GHz (Spectrum Analyzer mode)
• -156 dBm/Hz / -161 dBm/Hz / -165 dBm/Hz Displayed Average Noise Level (Typ.)
• -99 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
• 1 Hz Minimum Resolution Bandwidth (RBW)
• Tracking Generator Standard
• EMI Filter and Quasi-Peak Detector Kit (Opt.*)
• Advanced Measurement Kit/Waterfall chart (Opt.*)
• 10.1 lnch Multi-Touch Screen, Mouse and Keyboard supported
• Web Browser Remote Control on PC and Mobile Terminals and File Operation

Product Details:

Product Description
Blake temprature, humidity and pressure moniroing solution for Cold Rooms. WiFi connected. Comes with alerts over SMS, Email, WhatsApp etc in case of breech. Optional feature of auto logging over a cloud dashboard.

Product Details:

VT-1890 manometer is a good measurement tool, it features quick respond and high accuracy, convenient to use. It is perfect for measuring ventilation and air conditioning system, spot check, clean room, or any gas pressure system troubleshooting. The meter comes with a black pouch, easy to storage and carry around.
Product DescriptionThis gas pressure meter features 11 selectable units of measure. The device measures gauge and differential pressure in the range of ±2 psi, a High resolution (0.001psi) gauge. VT-1890 manometer is a good measurement tool, it features quick respond and high accuracy, convenient to use. The meter has compact size and light weight, easy to carry and comfortable to hold. It is suitable for one hand operation, free up a hand for other work. The digital manometer is equipped withlarge LCD backlight display for clear reading even in the dark. This differential gauge is widely used for measuring ventilation and air conditioning system, spot check, clean room, or any gas pressure system troubleshooting. This air pressure meter has many functions such as 11 selectable units for measurement, convenient for use. Max./Min./Average values, and with a relative time clock. Low batteryindicator and pressure unit indicator. Zero adjustment, offset and DIF function. Data hold and automatically shutdown function.

Product Details:

Product DescriptionData Logger is used for measuring the surrounding temperature and humidity so that we can know the environmental conditions for production and storage.

SPECIFICATION

• LCD Display for easy usage / Data Review
• Data log can start without PC software setup
• External probe for difficult access monitoring
• LCD Display and external probe (optional accessory) facilitate “Enclosure” monitoring
• Small form factor design for consumer and commercial applications
• Micro USB connector for PC data upload
• AAA battery for small size and easy shipping

Product Details:

• Self Diagnosis
• Identifies Unknown model number of Devices
• Measures more than 2000 kinds of devices
• Tests 54 / 74 series TTL
• Tests 4000 and 4500 series CMOS
• 40 Pin capability

 

Product Details:

• Frequency Range: 0.15-1050 MHz
• Center Frequency Display Accuracy:±100KHz
• Marker Accuracy: (0.1% span + 100kHz)
• Frequency Scanwidth: 100kHz/div. to 100MHz/div. in 1-2-5 steps and 0Hz/div. (Zero Scan)

Product Details:

Product Description

• Designed to validate wrist straps for use at ESD stations through pass/ no pass light and audio indication
• Easy to operate instrument, with pass indicator for resistance between 0.75 and 10 megohms
• Operates on 9 V battery, with low battery indicator
• Calibration certificate and one year warranty provided
• This instrument can also be used to measure ESD
• Footwear with the use of an optional footplate arrangement