Flow Meters

Manual Chemical Nozzle All wetted parts made of PP And stainless steel SS3040-60 lpm, Inlet ¾”Suitable for Acids, Chemicals, Food and Pharmaceutical industry,Inks, Urea, Gasoline

Additional Information:

• Minimum Order Quantity: 1 Piece

The nozzle has an electronic OVAL GEAR flow meter With LCD display on the base of manual nozzle, with advantage of high accuracy up to + 0.5%, low weight easy to use and 5 digital subtotal and 8 digit Non resettable totalize etc.

Flow rate – 50-60 lpm Inlet – 1”Diameter of the spout 13/16”The oval gear flow meter is ideal for controlling and measuring low, medium and high viscosity such as Fuel, lubrication oil, with advantage of high precision and low pressure loss, compact light weight design and Easy installation

Additional Information:

• Minimum Order Quantity: 1 Piece

We are suppliers of Diesel Transfer Pump with 100% quality assurance and long lasting.

Specifications:

• Vane Pump – Model No. AC-TP09
• Flow rate - 80 LPM
• Voltage – 230V
• Power – 750 W
• Max Pressure – 3 bar
• Head – 9 m
• Negative suction – 5 m

Additional Information:

• Minimum Order Quantity: 1 Piece

We are suppliers of Stainless Steel Pneumatic Fuel Transfer Pump

Specifications:

• Flow rate – 70 liter / minute
• MOC – SS304
• Inlet diameter – 40 mm
• Outlet diameter – 25 mm
• Air hose diameter – 8 mm
• Safety Valve Pressure – 0.03 Mpa
• Air pressure > 0.1 Mpa Length of the pump – 1.1.12-meter
• Length of the tube – 1 meter Head – 4m
• Weight – 6 kg Filter Gauge supplied as free accessories

Additional Information:

• Minimum Order Quantity: 1 Piece

We are providing Electronic Oval Gear Flow Meter VT-25C Aluminum Oval Gear Flow meter has the ability to handle. A wide range of fluid viscosities with Exceptional level of repeatability and Durability, applying in the petroleum, Chemical, food industry etc. and it has Big advantages as follows.Low Pressure Drop Compact Size, Easy Maintenance Easy to read and operate display.Horizontal and Vertical Flexibility of Installation options.

Specifications:

• Flow range 20-120 LPM
• Accuracy - + 0.5%
• Max Viscosity – 1000 cps
• Max Operating Pressure – 3.4 MPa
• 5 Digital Subtotal with Floating Point from 0.01-99999.997
• Digit non-resettable totalizer.
• 3.6V lithium battery Power.

Additional Information:

• Minimum Order Quantity: 1 Piece

Extra long 4 meter high pressure hose Grease Control Gun, Grease# 0-2 NLGI50 kg container, Follower Plate, Wheels included.Grease output – 900 grams/minute Working pressure 5-8 Bar Drum height 430 mm, Drum diameter 355 mm Pressure ratio 50:1 Pump Cylinder diameter 70mm Suction diameter 32 mm, Suction Tube length 440 mmAir inlet connection ¼”, Grease oulet connection ¼”Air consumption at 8 Bar is 120 liter/minute Max Fluid pressure 400 Bar Weight 17.5 kgs. Spare parts available at extra cost

Additional Information:

• Minimum Order Quantity: 1 Piece

Mechanical Flow meters designed for metering diesel fuel, gasoline, kerosene, mineral spirits, with the advantage of large easy to read no. S. Quick reset knob. Flexible flow ports can be positioned vertically or horizontally. The easy reset register indicates product use up to 999. 9 gallons or liters. The master totalizer registers up to 99999999 liters. Max pressure 3 bar Max flow rate 23-153 lpm BSPF/NPT – 1 inch Precision 1% Aluminum housing Max temperature - 70 degree C Weight - 2. 5 kg

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Brief:
 
Designed for use with media with which a regular cast iron or steel barrel pump cannot be used. Pump body is made from glass filled polypropylene with Ryton veins. All Seals are from viton rubber all pump hardware is Stainless Steel Stainer fitted at the suction tube inlet stops contaminants from entering the pump. Complete with threaded polypropylene suction tube a choice of two 2" bung adaptor for use on both plastic metal drums of capacity 15 gallons (50 litre) - 55 gallons (205 litre)

Wetted Components:

Polypropylene, Ryton, Viton Stainless Steel

Recommended Use:

For dispensing water based media, antifreeze, acids, chemicals etc; in addition to use with all petroleum based products.

Additional Information:

• Minimum Order Quantity: 1 Piece

Brass Y Strainer with stainless steel filter ACS approved Size from 1”Brass Y strainer with stainless steel filter Technical standard:

1. Working pressure: 1.6Mpa
2. Working Medium: Water, Oil, Air
3. Working Temperature: -10°C to +120°C

Applications:

1. Hot and cold water systems
2. Super heated water systems
3. Steam, super heated steam systems
4. Pressurized air systems
5. Fluid excluding acid

Additional Information:

• Minimum Order Quantity: 1 Piece

B Series Explosion proof Pump type – Vane Voltage – 220/230VLead Distance – 20 M3 PHASE Suction - 5 meter Pump MOC – Cast Iron Power - 1 HP Port - 1"Head - 20 meter Flow rate - 80 LPM

Additional Information:

• Minimum Order Quantity: 1 Piece

For diesel, gasoline, kerosene, mineral spirits, Standard solvent and heptane. Explosion-proof permanent magnet motor with thermal overload protection. Built-in strainer, bypass valve Ball bearing construction, no lubrication required 1" diameter, 12'hose with static ground wire and 1" manual nozzle boot that protects against dirt and contamination. 2" threaded base for tank openings Corrosion-Proof section pipe. Rain proof, water proof 30-minute duty cycle/not for continuous operation. Body – Cast Iron, Available flow rate – 75 Explosion Proof motor, Voltage DC12 or DC24, Inlet 3/4” NPT, 1” NPT, Threaded tank adapter 2” NPT, Nozzle hanger. Diameter of spout -13/16”, Accuracy +/- 1%, Repeatability 0.2%.

Additional Information:

• Minimum Order Quantity: 1 Piece

Features:

• Diaphragm Pump
• 220V
• EPDM Pump Body Material
• 35 LPM
• Head 5 meters
• Negative suction 3 meters

Specification:

• Permanent magnet and continuous duty .
• Built-in Pressure switch automatically starts and stops pump when faucets is opened and closed.
• Self-priming so pump can be located above water tank Runs dry for extended periods of time without damage Holding excellent motor keep stable temperature of the pump body.

Additional Information:

• Minimum Order Quantity: 1 Piece

Features:

• 16”600 ml Air caulking gun
• Material of gun  body : Aluminum alloy material of handle : Aluminum alloy
• Gun weight : 1115

Specification:

• Heavy gauge drawn aluminum barrel holder forcar tridges/sausages.
• Direct air pressure on plunger of cartridge floating piston pressure on sausage.
• Built in dual exhaust system for instant stop of sealant when trigger is released.
• Sturdy, light weight, comfor-grip handle.
• Quick release glass reinforced nylon caps.
• Max input air supply - 100 psi
• All components spares available

Additional Information:

• Minimum Order Quantity: 1 Piece

Specification:

· VTCM conductivity meters includes measurement of conductivity temperature in liquids

Automatic Calibration

The meter is capable of calibrating up to 5 points using standard solution.

From Setup Menu, choose CAL (Calibration) and press key to set known conductivity value, immerse conductivity electrode into calibration solution, press ENTER key and meter is automatically calibrated.

Conductivity Auto-Ranging

VTCM Series have auto-range function for measuring conductivity. Upon immersing conductivity sensor into sample solution, the screen immediately displays the value in appropriate measurement range for accuracy.

Automatic Temperature Compensation

Using the supplied temperature probe, the temperature value is displayed on the screen. The meter automatically compensates for optimum accuracy under variable temperature conditions.

Adjustable Temperature Coefficient And Cell Constant

Various Ions may have different temperature coefficients. The meters can set the temperature coefficient between 0 and 3.9% in degrees centigrade for optimum accuracy, set three cell constants(O.1,1 and 10) for measuring requirements

Additional Information:

• Minimum Order Quantity: 1 Unit